| Item | DC Permanent Magnet Motor |
| HP | 1/25 |
| Voltage | 90V DC |
| Nameplate RPM | 1,750 |
| Shaft Dia. | 5/16 in |
| Frame | 25 |
| Full Load Amps | 0.70 A |
| Phase | Not Applicable |
| RPM Range | 1,701-1,800 |
| Motor Thermal Protection | No Protection |
| Ins. Class | H |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Motor Mounting Type | Face/Base |
| Motor Bearings | Ball |
| Shaft Length | 1 1/2 in |
| Brush Type | External |
| Voltage Compatibility | 90V DC |
| Motor Service Factor | 1 |
| Overall Length | 6 7/16 in |
| Motor Design | Permanent Magnet DC |
| Motor Application | Sub-Fractional Motor |
| Max. Ambient Temp. | 40 Degrees C |
| Motor Sub Application | General Purpose |
| Standards | CE, CSA, UL |
| Weight | 6 lb |
| Nominal Efficiency | 47.8 % |
| Duty Cycle | Continuous |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
DC Permanent Magnet Motor, 90V DC, Round, LEESON, Mfr# M1110003.00
$259,99
Free shipping will be applied on orders over $50
DC Permanent Magnet Motor, Not Applicable Phase, Motor Design Permanent Magnet DC, 1/25 HP, Nameplate RPM 1,750, Voltage 90V DC, 0.70 A Full Load Amps, 25 Frame, Motor Service Factor 1, Motor Thermal Protection No Protection, Ins. Class H, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Face/Base, Shaft Dia. 5/16 in, Motor Bearings Ball, Shaft Length 1 1/2 in, Brush Type External, Overall Length 6 7/16 in
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.