| Chemical Metering Pump Type | Diaphragm |
| Flow Rate Output Control | Adjustable |
| Voltage | 115 |
| Max. Flow (gpd) - Pumps | 100.00 gpd |
| Max. Pressure - Pumps | 60 psi |
| Diaphragm Material | CSPE, PTFE, Viton |
| Voltage - Pumps | 115V AC |
| Phase - Pumps | 1 |
| Max. Viscosity - Pumps | 300 cps |
| HP - Pumps | 1/60 hp |
| Turn Down Ratio - Pumps | 10:1 |
| Reproducibility - Pumps | +/-5.0% |
| Reproducibility | +/-5.0% |
| Max. Viscosity | 300 cps |
| Pump Type | Diaphragm |
| Height | 9 in |
| Seals and O-Rings | CSPE |
| Item - Chemical Metering Pumps | Chemical Metering Pump |
| Body Material - Pumps | Styrene Acrylonitrile |
| Head and Fitting Material - Pumps | PVC |
| Hz | 60 |
| Phase | Single |
| Standards | cETLus Listed, ETL |
| cc/Min. | 1,022 cc/min |
| Length | 8 7/8 in |
| Tubing Material | PVC/Polyethylene |
| Features | Adjustable Output Via Stroke Length |
| Suction Lift | 4 ft |
| Max. Pressure | 60 psi |
| Min. Flow Rate | 10.00 gpd |
| Body Material | Styrene Acrylonitrile |
| Includes | Bleed Valve, Foot Valve Strainer with Weight, Injection Back Pressure Valve, Tube |
| Turn Down Ratio | 10:1 |
| Ball Material | Ceramic |
| Motor RPM | 70 RPM |
| Ball Material - Pumps | Ceramic |
| Self-Priming | Yes |
| Width | 7 3/8 in |
| Max. Strokes per Minute | 70 stroke/min |
| Head and Fitting Material | PVC |
| Number of Feeds | 1 |
| Cord Length | 6 ft |
| Max. Flow Rate | 100 gpd |
| Motor HP | 1/60 |
| Seals and O-Rings - Pumps | CSPE |
| Item | Chemical Metering Pump |
| Head Material | PVC |
| Flow Rate (Maximum) | 100 gpd |
| Intake Connection Type | Tube |
| Discharge Connection Size | 1/2 in |
| Fitting Material | PVC |
| Duty Cycle | Continuous |
| Flow Rate (Minimum) | 10 gpd |
| Stroke Rate (Maximum) | 70 stroke/min |
| Seal Material | CSPE |
| Check Ball Material | Ceramic |
| Overall Height | 7.3 in |
| Control Programs | Manual Control |
| Chemical Compatibility | Ammonium Hydroxide, Antifreeze, Calcium Carbonate, Sodium Hydroxide 20%, Sodium Hypochlorite 5%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Water |
| Pump Drive Type | Electric Motor |
| Priming | Self-Priming |
| Discharge Connection Type | Tube |
| Nameplate Voltage | 115/230V AC |
| Degassing Valve Included | No |
| Overall Width | 7.4 in |
| Media Temperature (Maximum) | 104 Degrees F |
| Intake Connection Size | 1/2 in |
| Viscosity (Maximum) | 300 cps |
| Overall Length | 8.8 in |
| Frequency | 60 Hz |
| Operating Pressure (Maximum) | 60 psi |
| Horsepower (Maximum) | 1/60 hp |
| Housing Material | Styrene Acrylonitrile |
| Motor Speed (Maximum) | 70 RPM |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Chemical Metering Pump, 300 cps, 1/60 HP, CHEM-TECH, Mfr# X100-XA-AAAAG19
$700,99
-$54.01 / ea
with subscription
Free shipping will be applied on orders over $50
Chemical Metering Pump, Chemical Compatibility Ammonium Hydroxide, Antifreeze, Calcium Carbonate, Sodium Hydroxide 20 Percent, Sodium Hypochlorite 5 Percent, Sulfuric Acid 10 Percent, Sulfuric Acid 20 Percent, Sulfuric Acid 30 Percent, Water, Control Programs Manual Control, Diaphragm Material CSPE, PTFE, Viton, Discharge Connection Size 1/2 in, Discharge Connection Type Tube, Fitting Material PVC, Flow Rate (Maximum) 100 gpd, Head Material PVC
Out of stock
Analogues
$699,99
You must be logged in to post a review.
-$35.7
with sub
$801,99
Reviews
There are no reviews yet.