Chemical Metering Pump Type | Diaphragm |
Flow Rate Output Control | Adjustable |
Max. Flow (gpd) - Pumps | 3.00 gpd |
Voltage | 115 |
Diaphragm Material | CSPE, PTFE, Viton |
Max. Pressure - Pumps | 100 psi |
Voltage - Pumps | 115V AC |
Phase - Pumps | 1 |
Max. Viscosity - Pumps | 300 cps |
HP - Pumps | 1/60 hp |
Turn Down Ratio - Pumps | 10:1 |
Reproducibility - Pumps | +/-5.0% |
Ball Material - Pumps | Ceramic |
Standards | cETLus Listed, ETL |
Width | 7 3/8 in |
Cord Length | 6 ft |
Phase | Single |
Max. Strokes per Minute | 7 stroke/min |
cc/Min. | 8 cc/min |
Pump Type | Diaphragm |
Max. Flow Rate | 3 gpd |
Seals and O-Rings | CSPE |
Item - Chemical Metering Pumps | Chemical Metering Pump |
Features | Adjustable Output Via Stroke Length |
Number of Feeds | 1 |
Length | 8 7/8 in |
Self-Priming | Yes |
Ball Material | Ceramic |
Body Material - Pumps | Styrene Acrylonitrile |
Turn Down Ratio | 10:1 |
Max. Pressure | 100 psi |
Motor HP | 1/60 |
Height | 9 in |
Max. Viscosity | 300 cps |
Suction Lift | 4 ft |
Tubing Material | PVC/Polyethylene |
Head and Fitting Material - Pumps | PVC |
Seals and O-Rings - Pumps | CSPE |
Hz | 60 |
Min. Flow Rate | 0.3 gpd |
Body Material | Styrene Acrylonitrile |
Head and Fitting Material | PVC |
Item | Chemical Metering Pump |
Reproducibility | +/-5.0% |
Motor RPM | 7 RPM |
Includes | Bleed Valve, Foot Valve Strainer with Weight, Injection Back Pressure Valve, Tube |
Priming | Self-Priming |
Head Material | PVC |
Motor Speed (Maximum) | 7 RPM |
Duty Cycle | Continuous |
Overall Height | 7.3 in |
Overall Width | 7.4 in |
Degassing Valve Included | No |
Media Temperature (Maximum) | 104 Degrees F |
Flow Rate (Maximum) | 3 gpd |
Intake Connection Type | Tube |
Fitting Material | PVC |
Overall Length | 8.8 in |
Operating Pressure (Maximum) | 100 psi |
Horsepower (Maximum) | 1/60 hp |
Housing Material | Styrene Acrylonitrile |
Seal Material | CSPE |
Stroke Rate (Maximum) | 7 stroke/min |
Intake Connection Size | 1/2 in |
Flow Rate (Minimum) | 0.3 gpd |
Discharge Connection Size | 1/2 in |
Control Programs | Manual Control |
Viscosity (Maximum) | 300 cps |
Chemical Compatibility | Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Hydrochloric Acid 40%, Phosphoric Acid 40%, Potassium Hydroxide 50%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hydroxide 80%, Sulfuric Acid 10%, Water |
Discharge Connection Type | Tube |
Nameplate Voltage | 115/230V AC |
Frequency | 60 Hz |
Pump Drive Type | Electric Motor |
Check Ball Material | Ceramic |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Metering Pump, 3 gpd, 110 PSI, CHEM-TECH, Mfr# X003-XA-AAAAG19
$464.62
Free shipping will be applied on orders over $50
Chemical Metering Pump, Chemical Compatibility Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10 Percent, Hydrochloric Acid 20 Percent, Hydrochloric Acid 30 Percent, Hydrochloric Acid 40 Percent, Phosphoric Acid 40 Percent, Potassium Hydroxide 50 Percent, Sodium Hydroxide 20 Percent, Sodium Hydroxide 50 Percent, Sodium Hydroxide 80 Percent, Sulfuric Acid 10 Percent, Water, Control Programs Manual Control, Diaphragm Material CSPE, PTFE, Viton, Discharge Connection Size 1/2 in
9999 in stock
Must order in multiples of 1
Subtotal:
$464.62
You must be logged in to post a review.
Reviews
There are no reviews yet.