| Item | IEC Magnetic Contactor |
| Full Load Amps-Inductive | 9 A |
| Full Load Amps-Resistive | 9 A |
| Number of Poles | 3 |
| Coil Volts | 24 V AC |
| Reversing | No |
| HP @ 1 Phase - 120V | 33/100 hp |
| HP @ 1 Phase - 240V | 1 hp |
| HP @ 3 Phase - 208V | 2 hp |
| HP @ 3 Phase - 240V | 2 hp |
| HP @ 3 Phase - 480V | 3 hp |
| HP @ 3 Phase - 575V | 7 1/2 hp |
| Aux. Contact Configuration | 1NO |
| Enclosure NEMA Rating | 3R, 4 |
| Hz | 50/60 Hz |
| Width | 1.77 in |
| Frame / Series / Class / Code | TeSys |
| Height | 3.03 in |
| Standards | CSA, CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL Listed, UL 60947-4-1 |
| Depth | 3.39 in |
| Special Features | Overvoltage Category III, Minimum Switching Voltage 17 V Signalling Circuit, Insulation Resistance 10 MOhm Signalling Circuit |
| Application | Motor Control, Resistive Load |
| Features | Without Built-In Suppressor Module |
| Overall Height | 3.03 in |
| Includes | Not Applicable |
| Overall Width | 1.77 in |
| Operating Speed | 3600 cycles per hr |
| IP Rating | IP20 |
| Overvoltage Category | CAT III |
| Tightening Torque | 1.7 Nm |
| Operating Time | 12 to 22 ms (Closing), 4 to 19 ms (Opening) |
| Max. Temperature | 850°C |
| Impulse Withstand Voltage | 6 kV |
| Signalling Circuit Frequency | 25 to 400 Hz |
| Inrush VA | 70 VA |
| Rated Making Capacity | 250 A @ 440V (Power Circuit), 140 A (AC Signalling Circuit), 250 A (DC Signalling Circuit) |
| Electrical Connection | Screw Clamp Terminals |
| Hold VA | 7.5 VA (at 60 Hz 20°C), 7 VA (at 50 Hz 20°C) |
| Impedance | 2.5 mOhm |
| Control Circuit Voltage Limits | Drop-Out: 0.3 to 0.6 Uc (at 70°C 50/60 Hz), Operational: 0.8 to 1.1 Uc (at 60°C 50 Hz 0.85 to 1.1 Uc (at 60°C 60 Hz), 1 to 1.1 Uc (at 70°C 50/60 Hz) |
| Rated Insulation Volts | 600/690V |
| Electrical Durability | 0.6 Mcycles (20 A, AC-1, Less than 440 V), 1 Mcycles (9 A, AC-3, Less than 440 V) |
| Switching Voltage | 17 V (Signalling Circuit) |
| Net Weight | 0.32 kg |
| Non-Overlap Time | 1.5 ms |
| Rated Voltage | 690V AC, 300V DC |
| Rated Breaking Capacity | 250 A @ 440V |
| Mounts On | Plate, Rail |
| Max. Operating Watts | 2.2 kW (at 220 to 230V AC 50/60 Hz), 4 kW (at 380 to 400V AC 50/60 Hz), 4 kW (at 415V AC 50/60 Hz), 4 kW (at 440V AC 50/60 Hz), 5.5 kW (at 500V AC 50/60 Hz), 5.5 kW (at 660 to 690V AC 50/60 Hz) |
| Watts Loss | 2 to 3W |
| Thermal Amperage | 10 A (at 60°C Signalling Circuit), 25 A (at 60°C Power Circuit) |
| Series | TeSys Easy |
| Shock Resistance | 15 G for 11 ms (Contactor Closed), 10 G for 11 ms (Contactor Open) |
| Mechanical Durability | 10 Mcycles |
| Environmental Attributes | Mercury Free, PVC Free, Toxic Heavy Metal Free, Pollution Degree 3 |
| Insulation Resistance Range | Greater Than 10 MOhms (Signalling Circuit) |
| Vibration Resistance | 4 G (Contactor Closed), 2 G (Contactor Open) |
| Working Height | Up to 6561.68 ft |
| Switching Current | 5 mA (Signalling Circuit) |
| Fuse Amps | 10 A (Signalling Circuit), 25 A (Type 1 Power Circuit), 20 A (Type 2 Power Circuit) |
| Coil Voltage | 24V AC |
| Number of Auxillary Contacts | 1 |
| Embedded Surge Suppressor | No |
| Horsepower @ Single Phase - 120V AC | 1/3 hp |
| Frequency | 50/60 Hz |
| Minimum Operating Temperature | -40 Degrees F |
| Resistance Properties | Fire Resistant, Insulation Resistant |
| Horsepower @ Three Phase - 600V AC | 7 1/2 hp |
| Reversing Capability | Non-Reversing |
| Number of Normally Closed Main Contacts | 0 |
| Mechanical Operating Durability | 10,000,000 |
| Horsepower @ Three Phase - 480V AC | 3 hp |
| NEMA Size | Not Applicable |
| Overall Depth | 3.39 in |
| Full Load Current - Inductive | 9 A |
| Horsepower @ Single Phase - 240V AC | 1 hp |
| Maximum Voltage Rating | 690V AC |
| Contactor Style | IEC |
| Electrical Operating Durability | 1,000,000, 600,000 |
| Includes Auxiliary Contacts | Yes |
| Full Load Current - Resistive | 9 A |
| Horsepower @ Three Phase - 208V AC | 2 hp |
| Terminal Connection Type | Screw Clamp Terminals |
| Auxiliary Contact Form | 1NO |
| Number of Normally Open Main Contacts | 3 |
| Mounting Style | DIN Rail, Plate |
| Horsepower @ Three Phase - 240V AC | 2 hp |
| Maximum Operating Temperature | 140 Degrees F |
| NEMA Enclosure Rating | No Enclosure |
| Product Name | Easy TeSys DPE |
| Associated Fuse Rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1, 25 A gG at Less than or Equal to 690 V coordination type 1 for power circuit, 20 A gG at Less than or Equal to 690 V coordination type 2 for power circuit |
| Connections - Terminals | Power circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible without cable end, Power circuit: screw clamp terminals 2 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible without cable end, Power circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible with cable end, Power circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible with cable end, Power circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: solid without cable end, Power circuit: screw clamp terminals 2 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: solid without cable end, Control circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: solid without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: solid without cable end |
| Conventional Free Air Thermal Current | 10 A (at 140°F (60°C)) for signalling circuit, 25 A (at 140°F (60°C)) for power circuit |
| Pole Contact Composition | 3 NO |
| Control Circuit Type | AC 50/60 Hz |
| Maximum Operating Rate | 3600 cyc/h 140°F (60°C) |
| Product Certifications | UL, CSA |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Heat Dissipation | 2 to 3 W 50/60 Hz |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Poles Description | 3P |
| Ambient Air Temperature For Storage | -76 to 176°F (-60 to 80°C) |
| Ambient Air Temperature For Operation | -40 to 140°F (-40 to 60°C) |
| Minimum Switching Current | 5 mA for signalling circuit |
| Rated Insulation Voltage | Power circuit 690 V IEC 60947-4-1, Power circuit 600 V CSA, Power circuit 600 V UL, Signalling circuit 690 V IEC 60947-1, Signalling circuit 600 V CSA, Signalling circuit 600 V UL |
| Rated Operational Current | 9 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3 for power circuit, 20 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-1 for power circuit |
| Mechanical Robustness | Vibrations contactor open 2 Gn, 5 to 300 Hz), Vibrations contactor closed 4 Gn, 5 to 300 Hz), Shocks contactor open 10 Gn for 11 ms), Shocks contactor closed 15 Gn for 11 ms) |
| Pollution Degree | 3 |
| Control Circuit Voltage | 24 V AC 50/60 Hz |
| Inrush Power in VA | 70 VA 60 Hz cos phi 0.75 (at 68°F (20°C)), 70 VA 50 Hz cos phi 0.75 (at 68°F (20°C)) |
| Maximum Horse Power Rating | 0.33 hp at 115 V AC 50/60 Hz for 1 phase motors, 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors, 2 hp at 200/208 V AC 50/60 Hz for 3 phase motors, 2 hp at 230/240 V AC 50/60 Hz for 3 phase motors, 3 hp at 460/480 V AC 50/60 Hz for 3 phase motors, 7.5 hp at 575/600 V AC 50/60 Hz for 3 phase motors |
| Auxiliary Contact Composition | 1 NO |
| Rated Impulse Withstand Voltage | 6 kV IEC 60947 |
| IRMS Rated Making Capacity | 250 A at 440 V for power circuit conforming to IEC 60947, 140 A AC for signalling circuit conforming to IEC 60947-5-1, 250 A DC for signalling circuit conforming to IEC 60947-5-1 |
| IP Degree Of Protection | IP20 front face IEC 60529 |
| Contactor Application | Resistive load, Motor control |
| Insulation Resistance | Greater than 10 MOhm for signalling circuit |
| Average Impedance | 2.5 mOhm - Ith 25 A 50 Hz for power circuit |
| Maximum Operational Voltage | Power circuit Less than or Equal to 690 V AC 25 to 400 Hz, Power circuit Less than or Equal to 300 V DC |
| Power Dissipation Per Pole | 1.56 W AC-1, 0.2 W AC-3 |
| Utilisation Category | AC-4, AC-1, AC-3 |
| Motor Power KW | 2.2 kW 220 to 230 V AC 50/60 Hz, 4 kW 380 to 400 V AC 50/60 Hz, 4 kW 415 V AC 50/60 Hz, 4 kW 440 V AC 50/60 Hz, 5.5 kW 500 V AC 50/60 Hz, 5.5 kW 660 to 690 V AC 50/60 Hz |
| Product Or Component Type | Contactor |
| Hold-In Power Consumption in VA | 7.5 VA 60 Hz cos phi 0.3 (at 68°F (20°C)), 7 VA 50 Hz cos phi 0.3 (at 68°F (20°C)) |
| Mounting Support | Rail, Plate |
| Auxiliary Contacts Type | Mechanically linked 1 NO IEC 60947-5-1 |
| Fire Resistance | 1562°F (850°C) IEC 60695-2-1 |
| Operating Altitude | 0 to 6561.68 ft (0 to 2000 m) |
| Country of Origin (subject to change) | Indonesia |
| Package Quantity | 1 |
Easy TeSys, 3 Poles, 24 V AC, 9 A, Reversing: No, SCHNEIDER ELECTRIC, Mfr# DPE09B7
$27,19
Free shipping will be applied on orders over $50
IEC Magnetic Contactor, Auxiliary Contact Form 1NO, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 24V AC, Number of Poles 3, Full Load Current - Inductive 9 A, Full Load Current - Resistive 9 A, Reversing Capability Non-Reversing, Overall Height 3.03 in, Overall Width 1.77 in, Terminal Connection Type Screw Clamp Terminals, Mounting Style DIN Rail, Plate, Series TeSys Easy, Number of Auxillary Contacts 1, Contactor Style IEC, Horsepower @ Three Phase - 240V AC 2 hp
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.