Easy TeSys, 3 Poles, 240 V AC, 18 A, Reversing: No, Schneider, Mfr#: DPE18U7

IEC Magnetic Contactor

18 A

18 A

3

240 V AC

No

1/2 hp

2 hp

3 hp

3 hp

7 1/2 hp

10 hp

1NO

3R; 4

50/60 Hz

1.77 in

3.03 in

CSA, CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL Listed, UL 60947-4-1

TeSys

3.39 in

Overvoltage Category III; Minimum Switching Voltage 17 V Signalling Circuit; Insulation Resistance 10 MOhm Signalling Circuit

3.03 in

1.77 in

Motor Control, Resistive Load

Without Built-In Suppressor Module

Greater Than 10 MOhms (Signalling Circuit)

690V AC, 300V DC

Drop-Out: 0.3 to 0.6 Uc (at 70°C 50/60 Hz); Operational: 0.8 to 1.1 Uc (at 60°C 50 Hz 0.85 to 1.1 Uc (at 60°C 60 Hz), 1 to 1.1 Uc (at 70°C 50/60 Hz)

850°C

1 Mcycles (18 A, AC-3, Less than 440 V); 0.6 Mcycles (25 A, AC-1, Less than 440 V)

TeSys Easy

7.5 VA (at 60 Hz 20°C), 7 VA (at 50 Hz 20°C)

6 kV

IP20

4 kW (at 220 to 230V AC 50/60 Hz), 7.5 kW (at 380 to 400V AC 50/60 Hz), 9 kW (at 415V AC 50/60 Hz), 9 kW (at 440V AC 50/60 Hz), 10 kW (at 500V AC 50/60 Hz), 10 kW (at 660 to 690V AC 50/60 Hz)

10 A (at 60°C Signalling Circuit), 25 A (at 60°C Power Circuit)

70 VA

Plate, Rail

0.325 kg

Screw Clamp Terminals

Up to 6561.68 ft

1.5 ms

250 A @ 440V (Power Circuit), 140 A (AC Signalling Circuit), 250 A (DC Signalling Circuit)

15 G for 11 ms (Contactor Closed), 10 G for 11 ms (Contactor Open)

12 to 22 ms (Closing), 4 to 19 ms (Opening)

17 V (Signalling Circuit)

3600 cycles per hr

25 to 400 Hz

Mercury Free, Toxic Heavy Metal Free, Pollution Degree 3

2.5 mOhm

5 mA (Signalling Circuit)

2 to 3W

600/690V

10 Mcycles

1.7 Nm

CAT III

10 A (Signalling Circuit), 40 A (Type 1 Power Circuit), 25 A (Type 2 Power Circuit)

250 A @ 440V

4 G (Contactor Closed), 2 G (Contactor Open)

Not Applicable

140 Degrees F

Fire Resistant, Insulation Resistant

1NO

10,000,000

18 A

Screw Clamp Terminals

No Enclosure

1,000,000, 600,000

1

690V AC

240V AC

1/2 hp

Yes

DIN Rail, Plate

3

10 hp

IEC

2 hp

7 1/2 hp

50/60 Hz

18 A

No

3 hp

Non-Reversing

3.39 in

-40 Degrees F

3 hp

7.5 VA 60 Hz cos phi 0.3 (at 68°F (20°C)); 7 VA 50 Hz cos phi 0.3 (at 68°F (20°C))

Power circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible without cable end; Power circuit: screw clamp terminals 2 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible without cable end; Power circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible with cable end; Power circuit: screw clamp terminals 2 0.00 to 0.00 in² (1 to 2.5 mm²) - cable stiffness: flexible with cable end; Power circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: solid without cable end; Power circuit: screw clamp terminals 2 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: solid without cable end; Control circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible without cable end; Control circuit: screw clamp terminals 2 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible without cable end; Control circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: flexible with cable end; Control circuit: screw clamp terminals 2 0.00 to 0.00 in² (1 to 2.5 mm²) - cable stiffness: flexible with cable end; Control circuit: screw clamp terminals 1 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: solid without cable end; Control circuit: screw clamp terminals 2 0.00 to 0.01 in² (1 to 4 mm²) - cable stiffness: solid without cable end

AC 50/60 Hz

10 A (at 140°F (60°C)) for signalling circuit; 25 A (at 140°F (60°C)) for power circuit

Power circuit Less than or Equal to 690 V AC 25 to 400 Hz; Power circuit Less than or Equal to 300 V DC

4 kW 220 to 230 V AC 50/60 Hz; 7.5 kW 380 to 400 V AC 50/60 Hz; 9 kW 415 V AC 50/60 Hz; 9 kW 440 V AC 50/60 Hz; 10 kW 500 V AC 50/60 Hz; 10 kW 660 to 690 V AC 50/60 Hz

6 kV IEC 60947

3 NO

2 to 3 W 50/60 Hz

1 NO

0.36 W AC-3; 1.56 W AC-1

Power circuit 690 V IEC 60947-4-1; Power circuit 600 V CSA; Power circuit 600 V UL; Signalling circuit 690 V IEC 60947-1

-76 to 176°F (-60 to 80°C)

10 A gG for signalling circuit conforming to IEC 60947-5-1; 40 A gG at Less than or Equal to 690 V coordination type 1 for power circuit; 25 A gG at Less than or Equal to 690 V coordination type 2 for power circuit

Contactor

0.5 hp at 115 V AC 50/60 Hz for 1 phase motors; 2 hp at 230/240 V AC 50/60 Hz for 1 phase motors; 3 hp at 200/208 V AC 50/60 Hz for 3 phase motors; 3 hp at 230/240 V AC 50/60 Hz for 3 phase motors; 7.5 hp at 460/480 V AC 50/60 Hz for 3 phase motors; 10 hp at 575/600 V AC 50/60 Hz for 3 phase motors

0 to 6561.68 ft (0 to 2000 m)

Rail; Plate

AC-4; AC-1; AC-3

17 V for signalling circuit

250 A at 440 V for power circuit conforming to IEC 60947; 140 A AC for signalling circuit conforming to IEC 60947-5-1; 250 A DC for signalling circuit conforming to IEC 60947-5-1

5 mA for signalling circuit

3600 cyc/h 140°F (60°C)

70 VA 60 Hz cos phi 0.75 (at 68°F (20°C)); 70 VA 50 Hz cos phi 0.75 (at 68°F (20°C))

1562°F (850°C) IEC 60695-2-1

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Resistive load; Motor control

IP20 front face IEC 60529

18 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3 for power circuit; 25 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-1 for power circuit

Greater than 10 MOhm for signalling circuit

3P

2.5 mOhm - Ith 25 A 50 Hz for power circuit

UL; CSA

240 V AC 50/60 Hz

-40 to 140°F (-40 to 60°C)

Vibrations contactor open 2 Gn, 5 to 300 Hz); Vibrations contactor closed 4 Gn, 5 to 300 Hz); Shocks contactor open 10 Gn for 11 ms); Shocks contactor closed 15 Gn for 11 ms)

Mechanically linked 1 NO IEC 60947-5-1

3

Easy TeSys DPE

Indonesia

1