| Property | Value |
|---|---|
| GPM of Water @ 90 Ft. of Head | 25 |
| Width | 14-5/8 |
| Self-Priming | Yes |
| Application | Dewatering |
| Height | 17-1/8 |
| Material of Construction | Aluminum, Cast Iron |
| Volute/Wear Plate | Cast Iron |
| GPM of Water @ 10 Ft. of Head | 125 |
| Sensor Type | Low Oil |
| Length | 18-1/2 |
| GPM of Water @ 60 Ft. of Head | 87 |
| Mechanical Seal | Silicon Carbide |
| Casing Adapter | Aluminum |
| Impeller Material | Cast Iron |
| GPM of Water @ 30 Ft. of Head | 120 |
| Agency Compliance | EPA/CARB |
| Roll Bar Frame | Steel |
| Outlet | 2 |
| Inlet | 2 in MNPT |
| GPM of Water @ 20 Ft. of Head | 126 |
| HP | 4 hp |
| Max. Suction Lift | 26 ft |
| Item | Engine Driven Utility Pump |
| Engine/Motor Type | Gas |
| GPM of Water @ 80 Ft. of Head | 60 |
| Engine Brand | Honda |
| Engine RPM | 3600 |
| Max. Head | 115 ft |
| Solids Handling Capacity | 3/8 |
| Max. Pressure | 50 psi |
| GPM of Water @ 40 Ft. of Head | 115 |
| Ignition Type | Recoil-Start |
| Temp. Range | 33 Degrees to 104 Degrees F |
| Tank Capacity | 0.66 gal |
| GPM of Water @ 70 Ft. of Head | 75 |
| GPM of Water @ 50 Ft. of Head | 100 |
| Includes | Impeller Wrench |
| Check Valve | Buna-N |
| Impeller Type | Semi Open |
| Engine Size | 119 cc |
| Volute Material | Cast Iron |
| Overall Height | 17 1/8 in |
| Pump Mechanism | Centrifugal |
| Frame Design | Full-Frame |
| Flow Rate @ 60 Ft. of Head | 87 gpm |
| RPM | 3,600 RPM |
| Power Source | Gas |
| Inlet Gender | Male |
| Flow Rate @ 80 Ft. of Head | 60 gpm |
| Discharge | 2 in MNPT |
| Flow Rate @ 10 Ft. of Head | 125 gpm |
| Overall Width | 14 5/8 in |
| Maximum Self-Priming Lift | 20 ft |
| Frame Material | Steel |
| Overall Length | 18 1/2 in |
| Impeller Design | Semi-Open |
| Flow Rate @ 40 Ft. of Head | 115 gpm |
| Discharge Standard | NPT |
| Flow Rate @ 20 Ft. of Head | 126 gpm |
| Body Material | Cast Iron |
| Inlet Standard | NPT |
| Max. Diameter Solids | 3/8 in |
| Inlet Dia. | 2 in |
| Discharge Dia. | 2 in |
| Discharge Gender | Male |
| Max. Liquid Temp. | 104 Degrees F |
| Maximum Discharge Pressure | 50 psi |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
2" 4 HP Honda Powered Centrifugal Dewatering Pump, Tsurumi, Mfr#: TE3-50HA
$706.99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 119 cc, HP 4 hp, Tank Capacity 0.66 gal, Ignition Type Recoil-Start, Pump Mechanism Centrifugal, Body Material Cast Iron, Volute Material Cast Iron, Frame Material Steel, Flow Rate @ 10 Ft. of Head 125 gpm, Flow Rate @ 20 Ft. of Head 126 gpm, Flow Rate @ 40 Ft. of Head 115 gpm, Flow Rate @ 60 Ft. of Head 87 gpm, Flow Rate @ 80 Ft. of Head 60 gpm, Max. Head 115 ft, Max. Suction Lift 26 ft, Maximum Self-Priming Lift 20 ft
9999 in stock
Subtotal:
$706.99
You must be logged in to post a review.
Reviews
There are no reviews yet.