| Voltage | 12V DC |
| HP | 3/8 |
| Housing Material | Cast Aluminum |
| GPM | 20 gpm |
| Inlet Size | 1 in NPT |
| Seal Material | Buna-N |
| RPM | 2000 |
| Pump Design | Gear |
| Self-Priming | Yes |
| Seal Type | Lip |
| Max. Viscosity | 50 SUS |
| Item | Fuel Transfer Pump |
| Motor RPM | 2,000 RPM |
| Pressure Range | 16 psi |
| Overall Length | 12 in |
| Suction Tube Length | 40 in |
| Cord Length | 18 ft |
| Wetted Materials | Not Applicable |
| Manufacturers Warranty Length | Limited Lifetime |
| Features | Self priming, Powder-coated aluminum body,telescoping suction pipe (15in - 40in), Factory installed power Cord, Easy installation spin collar mount, Explosion Proof Motor, Thermal Overload Protection |
| Includes | Automatic Shut-Off Diesel Nozzle, Dispensing Hose, Factory-Installed Power Cord, Fuse Assembly, G20-12AD 12V DC 20 gpm Fuel Transfer Pump, Modular Fitting with Hardware, Tank Adapter, Telescoping Suction Pipe |
| Transfer Pump Application | Stationary Installations, Stationary Locations in Fleet |
| Agency Compliance | Class I, Division 2, Group D, cULus |
| Metered | No |
| Nozzle Material | Aluminum |
| Adapter Material | Aluminum |
| Max. Head - Pumps | 9 ft |
| Motor Enclosure | Explosion Proof |
| Standards | Class I Div 2, cULus Listed, IECEx/ATEX Zone 1 |
| Power Cord Length | 18 ft |
| Outlet Size | 1 in NPT |
| Nozzle Type | Manual |
| Pump Mount Size | 2 in |
| Bypass Valve | Yes |
| Hose Length | 14 ft |
| Bearing Type | Sleeve |
| Duty Cycle | 30 Minutes On/30 Minutes Off |
| Housing Material - Pumps | Aluminum |
| Overall Width | 10 in |
| Compatible Fluids | Diesel, Gasoline, Kerosene, E15 |
| Hose Dia. | 1 in |
| Overall Height | 8 in |
| For Use With | Diesel, Gasoline, Kerosene, E15 |
| Frequency (Hz) | 60 Hz |
| Diesel Exhaust Fluid Compatible | No |
| Compatible Chemicals | Diesel, Gasoline, Kerosene |
| Hose Cover Material | Nitrile |
| Adapter Connection Type | MNPT |
| Filter Included | Not Applicable |
| Height Above Container | 10 in |
| Hose Outside Dia. | 1 in |
| Meter Unit Of Measure | Not Applicable |
| Power Source | Electric |
| Hose Tube Material | Nitrile |
| Rated Voltage | 12V DC |
| Includes Bung Adapter | Yes |
| Min. Fluid Temp. | -20 Degrees F |
| Includes Nozzle | Yes |
| Suction Tube Material | Polypropylene |
| Thermal Protection | Yes |
| Food Grade | No |
| Max. Outlet Pressure | 12 psi |
| Nozzle Fluid Compatibility | Diesel |
| Includes Discharge Hose | Yes |
| Nozzle Operation | Automatic |
| Mount Type | Bung |
| Bung Connection Dia. | 2 in |
| Motor HP | 2/5 hp |
| Max. Flow Rate | 20 gpm |
| Explosion Proof | Yes |
| Variable Speed | No |
| Includes Spout | No |
| Includes Suction Tube | Yes |
| Runs Dry | No |
| Meter Type | Not Applicable |
| For Media Type | Diesel, Gasoline, Kerosene |
| For Container Size | 30 gal |
| Spout Material | Aluminum |
| Suction Tube OD | 1 in |
| Max. Fluid Temp. | 125 Degrees F |
| Full Load Amps | 40.0 A |
| Number of Phases | 1 |
| Housing Finish | Powder Coated |
| Discharge Connection Type | FNPT |
| Pump Connection Type | FNPT |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Fuel Transfer Pump , 12VDC , 20 GPM, 3/8 HP, 1" NPT Inlet, GPI, Mfr# G20-012MD
$650,99
-$19.53 / ea
with subscription
Free shipping will be applied on orders over $50
Fuel Transfer Pump, Max. Outlet Pressure 12 psi, For Use With Diesel, Gasoline, Kerosene, E15, Rated Voltage 12V DC, Suction Tube OD 1 in, Hose Length 14 ft, Suction Tube Length 40 in, Cord Length 18 ft, Includes Bung Adapter Yes, Runs Dry No, Nozzle Operation Automatic, Thermal Protection Yes, Frequency (Hz) 60 Hz, Power Source Electric, Variable Speed No, Includes Discharge Hose Yes, Self-Priming Yes, Compatible Chemicals Diesel, Gasoline, Kerosene, Discharge Connection Type FNPT
9999 in stock
Must order in multiples of 1
Subtotal:
$650.99
You must be logged in to post a review.
Reviews
There are no reviews yet.