| Application | Fittings, Gauges, Metal Threads, Pipes, Refrigerant Systems,Stem, Steel and Brass, Valves |
| Color | Red |
| Size | 300 mL |
| Substrates | Rigid Iron, Steel, Aluminum |
| Temp. Range | -65 to 300 Degrees F |
| Sealant Container | Cartridge |
| Item | Gasket Sealant |
| Type | Anaerobic |
| Begins to Harden | 30 min |
| Flash Point | 212 Degrees F |
| Viscosity | paste |
| Expansion Ratio | Fills gaps up to 0.009 in |
| Specific Gravity | 1.1 |
| Characteristics | General Purpose, Rigid, Thixotropic |
| Standards | CFIA Listed, NSF/ANSI 61 |
| Product Form | Gel |
| Cure Type | Anaerobic |
| Container Size and Type | 10.14 fl oz Cartridge |
| Maximum Gap Fill Size | 0.01 in |
| Minimum Viscosity | 500,000 cps |
| Sensor Safe | No |
| Minimum Operating Temperature | -65 Degrees F |
| Resistance Sensor Safe and Standards | NoCalifornia Proposition 65CEPA DSL/NDSL, NoCERCLA/SARA Section 311/312, NoCERCLA/SARA Section 313, NoOSHA 29 CFR 1910.1200, NoTSCA |
| Operating Temperature Range | -65 Degrees F to 300 Degrees F |
| Series | 518 |
| Working Time | 25 min |
| Pack Size | 1 EA |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Container Size Range | 5.1 oz to 16 oz |
| VOC Content Range | 30 g/L or Less |
| Sealant Type | Gasket Sealant |
| Maximum Viscosity | 4,500,000 cps |
| Working Time Range | 6 min to 30 min |
| Non-Hardening | Yes |
| Brand & Series | LOCTITE 518 |
| Maximum Operating Temperature | 300 Degrees F |
| Specific Sealing Application | Engine Casing, Gear Boxes |
| Consistency | Gel |
| Shear Strength | 1,525 psi |
| Compatible Materials | Metal |
| Full Cure Time | 4 hr |
| For Material Type | Aluminum, Cast Iron, Iron, Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Anaerobic Gasket Sealant, 300 mL, Red, Temp Range -65 to 300 Degrees F, LOCTITE, Mfr# 2096061
$79,89
Free shipping will be applied on orders over $50
Gasket Sealant, Color Red, Container Size 10.14 fl oz, Container Type Cartridge, Full Cure Time 4 hr, Cure Type Anaerobic, Maximum Gap Fill Size 0.01 in, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature -65 Degrees F, Series 518, Working Time 25 min, For Material Type Aluminum, Cast Iron, Iron, Steel, Standards California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA
9999 in stock
Must order in multiples of 1
Subtotal:
$79.89
You must be logged in to post a review.
WARNING: Cancer - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.