| Item | Gast Standard 1Am-Nrv-63A Air Motor |
| Motor Design | AIR |
| Rotation | CW/CCW |
| Overall Length | 4 1/4 in |
| Includes | Muffler |
| Shaft Length | 1 1/8 in |
| Length Less Shaft | 3 1/10 in |
| Standards | ATEX |
| Mount Type | Hub |
| Weight | 2 lb |
| Overall Height | 2 1/4 in |
| Overall Width | 2 1/2 in |
| Outside Diameter | 2 1/2 in |
| Shaft Material Grade | 197-223 BHN |
| Air Consumption | 22 cfm |
| Mounting Orientation | Any Angle |
| Housing Material Grade | G2500 |
| System of Measurement | Inch |
| Keyway Depth | Not Applicable |
| Output Power @ 50% Maximum Speed | 0.35 hp |
| Starting Torque | 5 in-lb |
| Minimum Ambient Temperature | 34 Degrees F |
| Minimum Operating Pressure | 1 psi |
| Nameplate Speed | 10,000 RPM |
| Minimum Flow Rate | 1 cfm |
| Housing Material Finish | Painted |
| Keyway Type | Not Applicable |
| Maximum Ambient Temperature | 248 Degrees F |
| Air Inlet Type | NPT |
| Series | 1AM |
| Inlet Size | 1/8 in |
| No Load Speed | 10,000 RPM |
| Maximum Flow Rate | 22 cfm |
| Output Power @ Maximum Speed | 0.38 hp |
| Keyway Width | Not Applicable |
| Keyway Length | Not Applicable |
| Air Inlet Center to Center Distance | 1 3/4 in |
| Manufacturers Warranty Length | 1 yr |
| Output Power @ 25% Maximum Speed | 0.25 hp |
| Shaft Material | Steel |
| Shaft Diameter | 3/8 in |
| Mount Hole Center-to-Center Width | Not Applicable |
| Bearing Protection | Not Applicable |
| Inlet Gender | Female |
| Mount Hole Center-to-Center Length | Not Applicable |
| Housing Material | Cast Iron |
| Maximum Operating Pressure | 100 psi |
| Motor Frame Material | Cast Iron |
| Maximum Torque | 2.7 in-lb |
| Shaft Orientation | Inline |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Gast Standard 1Am-Nrv-63A Air Motor, GAST, Mfr# 1AM-NRV-63A
$282,99
Free shipping will be applied on orders over $50
Gast Standard 1Am-Nrv-63A Air Motor, Output Power @ Maximum Speed 0.38 hp, Maximum Torque 2.7 in-lb, No Load Speed 10,000 RPM, Maximum Flow Rate 22 cfm, Shaft Diameter 3/8 in, Shaft Length 1 1/8 in, Mount Type Hub, Inlet Size 1/8 in, Air Inlet Type NPT, Rotation CW/CCW, Housing Material Cast Iron, Shaft Material Grade 197-223 BHN, Bearing Protection Not Applicable, Maximum Operating Pressure 100 psi, Includes Muffler, Keyway Width Not Applicable, Weight 2 lb, Housing Material Grade G2500
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.