| Item | Gast Standard 4Am-70C-Cb20 Air Motor |
| Motor Design | Air |
| Rotation | CW/CCW |
| Overall Length | 14 1/4 in |
| Standards | ATEX |
| Length Less Shaft | 6 11/16 in |
| Mount Type | Face |
| Includes | AGMA #8 Lubricant in Gear Chamber, High Strength Steel Output Shaft with Key and Plastic Cover, Tapered Roller Bearing and Hardened Polished Steel Worm Mating with Forged, Heat Treated High Manganese Bronze Worm Gear |
| Shaft Length | 2 13/16 in |
| Overall Height | 9 1/2 in |
| Weight | 60 lb |
| Overall Width | 8 13/16 in |
| Outside Diameter | Not Applicable |
| Output Location | Left Hand |
| Brake Type | None |
| Housing Material | Cast Iron |
| Air Consumption | 72 cfm |
| Shaft Material | Steel |
| Keyway Width | 1/4 in |
| System of Measurement | Inch |
| Mounting Orientation | Horizontal |
| Motor Frame Material | Cast Iron |
| Nameplate Speed | 150 RPM |
| Keyway Length | 2 3/8 in |
| Housing Material Finish | Painted |
| Gear Material | Steel |
| Maximum Operating Pressure | 100 psi |
| Output Power @ Maximum Speed | 1.1 hp |
| Output Power @ 50% Maximum Speed | 0.8 hp |
| Minimum Operating Pressure | 20 psi |
| Starting Torque | 400 in-lb |
| Number of Output Shafts | 1 |
| Minimum Flow Rate | 3 cfm |
| No Load Speed | 150 RPM |
| Inlet Size | 1/4 in |
| Keyway Type | Square |
| Maximum Ambient Temperature | 248 Degrees F |
| Output Power @ 25% Maximum Speed | 0.35 hp |
| Gear Type | Worm |
| Manufacturers Warranty Length | 1 yr |
| Housing Material Grade | Gray Iron |
| Air Inlet Type | NPT |
| Inlet Gender | Female |
| Shaft Diameter | 1 1/8 in |
| Minimum Ambient Temperature | 34 Degrees F |
| Shaft Orientation | Right Angle |
| Maximum Torque | 480 in-lb |
| Air Inlet Center to Center Distance | 2 1/2 in |
| Keyway Depth | 1/8 in |
| Gear Ratio | 20:1 |
| IP Rating | Not Applicable |
| External Hardware Material | Not Applicable |
| Mount Hole Center-to-Center Width | Not Applicable |
| Gear Material Grade | 8620 |
| Maximum Flow Rate | Not Applicable |
| Mount Hole Center-to-Center Length | Not Applicable |
| Bearing Protection | Not Applicable |
| Seal Material | Nitrile Rubber |
| AGMA Gear Class | Not Applicable |
| Series | 4AM |
| Overhung Load Capacity | Not Applicable |
| Shaft Material Grade | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Gast Standard 4Am-70C-Cb20 Air Motor, GAST, Mfr# 4AM-70C-CB20
$1706,99
Free shipping will be applied on orders over $50
Gast Standard 4Am-70C-Cb20 Air Motor, Output Power @ Maximum Speed 1.1 hp, Maximum Torque 480 in-lb, No Load Speed 150 RPM, Maximum Flow Rate Not Applicable, Shaft Diameter 1 1/8 in, Shaft Length 2 13/16 in, Mount Type Face, Inlet Size 1/4 in, Air Inlet Type NPT, Rotation CW/CCW, Housing Material Cast Iron, Gear Ratio 20:1, Air Consumption 72 cfm, Housing Material Finish Painted, AGMA Gear Class Not Applicable, Air Inlet Center to Center Distance 2 1/2 in, Inlet Gender Female
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.