Item | Hazardous Location Centrifugal Pump |
HP | 3 hp |
Housing Material | 316 Stainless Steel |
Phase | Three |
Inlet (In.) | 2 NPT |
Voltage | 208-230/460 |
Best Efficiency GPM @ Head | 75 @ 60 ft |
Inlet | 2 in NPT |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
GPM of Water @ 40 Ft. of Head | 104 |
Impeller Type | Closed |
GPM of Water @ 25 Ft. of Head | 118 |
GPM of Water @ 60 Ft. of Head | 75 |
Hazardous Location Class | Class I Division 1, Class II Division 2 |
GPM of Water @ 30 Ft. of Head | 114 |
Max. Case Pressure | 150 psi |
Height | 11 5/8 in |
Inlet Pressure | 115 psi |
Motor RPM | 3,450 RPM |
Max. Specific Gravity | 1 |
Max. Dia. Solids | 1/8 |
GPM of Water @ 70 Ft. of Head | 42 |
Duty | Continuous |
Width | 15 1/8 in |
Seal Material | Carbon, Ceramic, Viton |
Frame | 182TC |
Motor Ambient Temp. Rating | 140 Degrees F |
Agency Compliance | UL Listed for Class I Groups C and D and Class II Groups E, F and G |
Hz | 60 |
Impeller Material | Stainless Steel |
Bearing Type | Ball |
Temp. Code | T3C |
Wetted Materials | Carbon/Ceramic, Stainless Steel, Viton |
GPM of Water @ 50 Ft. of Head | 90 |
For Use With | Can Be Used with Nonflammable and Nonabrasive Liquids |
Port Rotation | 90 Degrees Increments |
Amps | 7.28-6.62/3.31 |
Includes | Manual |
GPM of Water @ 20 Ft. of Head | 122 |
Manufacturers Warranty Length | 1 yr |
Volute Material | 316 Stainless Steel |
Service Factor | 1.15 |
Seal Type | Mechanical |
Shaft Material | Stainless Steel |
Motor Type | Three-Phase Induction |
Overall Length | 17.75 in |
Standards | CUS |
Overall Width | 15.13 in |
Overall Height | 11.63 in |
Product Type | Centrifugal Pump |
Wetted Material | Carbon, Ceramic, Stainless Steel, Viton |
Ambient Temperature (Minimum) | 40 Degrees F |
Ambient Temperature (Maximum) | 140 Degrees F |
Best Efficiency Head | 60 ft |
Discharge Rotation | 90 Degrees Increments |
Flow Rate @ 20 ft of Head (Maximum) | 122 gpm |
Flow Rate @ 60 ft of Head (Maximum) | 75 gpm |
Intake Pipe Type | NPT |
Viscosity (Maximum) | 264 cps |
Duty Cycle | Continuous |
Motor Thermal Protection | None |
Flow Rate @ 40 ft of Head (Maximum) | 104 gpm |
Media Temperature (Minimum) | 40 Degrees F |
Compatible Motor Frame | 182TC |
Media Temperature (Maximum) | 250 Degrees F |
Discharge Pipe Type | NPT |
Flow Rate @ 50 ft of Head (Maximum) | 90 gpm |
Flow Rate @ 25 ft of Head (Maximum) | 118 gpm |
Best Efficiency Flow | 75 gpm |
For Use With Potable Systems | No |
Feet of Head (Maximum) | 78 ft |
Discharge Pipe Size | 1 1/2 in |
Case Pressure (Maximum) | 150 psi |
Shaft Outer Diameter | 7/16 in |
Horsepower (Maximum) | 3 hp |
Suction Port | 2 in NPT |
Nameplate Voltage | 208-230/460V AC |
Solid Diameter (Maximum) | 1/6 in |
Current | 7.28 to 6.62 or 3.31 A |
Specific Gravity (Maximum) | 1 |
Priming | Manual |
Discharge Port | 1 1/2 in NPT |
Flow Rate @ 30 ft of Head (Maximum) | 114 gpm |
Temperature Code | T3C |
Intake Pipe Size | 2 in |
Frequency | 60 Hz |
Motor Speed (Maximum) | 3,450 RPM |
Flow Rate @ 70 ft of Head (Maximum) | 42 gpm |
Impeller Design | Closed |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Haz Location Cent Pump, 3 HP, DAYTON, Mfr# 5WXV0
$3775,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Discharge Rotation 90 Degrees Increments, Feet of Head (Maximum) 78 ft, Flow Rate @ 20 ft of Head (Maximum) 122 gpm, Flow Rate @ 40 ft of Head (Maximum) 104 gpm, For Use With Potable Systems No, Hazardous Location Class Class I Division 1 Groups C, D, Class II Division 2 Groups E, F, G, Horsepower (Maximum) 3 hp, Housing Material 316 Stainless Steel, Impeller Design Closed, Impeller Material Stainless Steel
0 in stock
Must order in multiples of 1
Subtotal:
$3775.99
You must be logged in to post a review.
Reviews
There are no reviews yet.