| Item | IEC Magnetic Contactor |
| Full Load Amps-Inductive | 65 A |
| Full Load Amps-Resistive | 80 A |
| Action | Non-Reversing |
| Number of Poles | 3 |
| Coil Volts | 24 V AC |
| Reversing | No |
| HP @ 1 Phase - 120V | 5 hp |
| HP @ 1 Phase - 230V | 10 |
| HP @ 1 Phase - 240V | 10 hp |
| Height | 4.8 in |
| Width | 2.17 in |
| HP @ 3 Phase - 208V | 20 hp |
| HP @ 3 Phase - 240V | 20 hp |
| HP @ 3 Phase - 575V | 50 hp |
| Depth | 4.72 in |
| Enclosure NEMA Rating | No Enclosure |
| HP @ 3 Phase - 480V | 40 hp |
| Aux. Contact Configuration | 1NO/1NC |
| Hz | 50/60 |
| Standards | CCC, CSA, CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, GOST, IEC 60335-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, UL Listed |
| Auxiliary Contact Form | 1NO/1NC |
| NEMA Size | Not Applicable |
| Includes | Everlink Power Connections |
| Series | TeSys Deca |
| Electrical Connection | Screw Clamp Terminals |
| Hold VA | 13 VA (at 60 Hz 20°C), 15 VA (at 50 Hz 20°C) |
| Max. Operating Watts | 11 kW (at 400V AC 50/60 Hz AC-4), 18.5 kW (at 220 to 230V AC 50/60 Hz AC-3), 30 kW (at 380 to 400V AC 50/60 Hz AC-3), 37 kW (at 500V AC 50/60 Hz AC-3), 37 kW (at 660 to 690V AC 50/60 Hz AC-3), 18.5 kW (at 220 to 230V AC 50/60 Hz AC-3e), 30 kW (at 380 to 400V AC 50/60 Hz AC-3e), 37 kW (at 500V AC 50/60 Hz AC-3e), 37 kW (at 660 to 690V AC 50/60 Hz AC-3e) |
| Signalling Circuit Frequency | 25 to 400 Hz |
| IP Rating | IP20 |
| Application | Motor Control, Resistive Load |
| Overvoltage Category | CAT III |
| Working Height | Up to 9842.52 ft |
| Environmental Attributes | Mercury Free, PVC Free, Toxic Heavy Metal Free, Pollution Degree 3 |
| Rated Breaking Capacity | 1000 A @ 440V |
| Fire Rating | UL 94 V1 |
| Impulse Withstand Voltage | 6 kV |
| Impedance | 1.5 mOhm |
| Vibration Resistance | 4 G (Contactor Closed), 2 G (Contactor Open) |
| Mechanical Durability | 6 Mcycles |
| Insulation Resistance Range | Greater Than 10 MOhms (Signalling Circuit) |
| Thermal Amperage | 10 A (at 60°C Signalling Circuit), 80 A (at 60°C Power Circuit) |
| Non-Overlap Time | 1.5 ms |
| Rated Voltage | 690V AC, 300V DC |
| Rated Insulation Volts | 600/690V |
| Features | Without Built-In Suppressor Module |
| Control Circuit Voltage Limits | Drop-Out AC: 0.3 to 0.6 Uc (at -40 to 70°C 50/60 Hz), Operational AC: 0.8 to 1.1 Uc (at -40 to 60°C 50 Hz), 0.85 to 1.1 Uc (at -40 to 60°C 60 Hz), 1 to 1.1 Uc (at 60 to 70°C 50/60 Hz) |
| Rated Short-Time Withstand Current | 520 A (at 40°C for 10 s Power Circuit), 900 A (at 40°C for 1 s Power Circuit), 110 A (at 40°C for 10 min Power Circuit), 260 A (at 40°C for 1 min Power Circuit), 100 A (For 1 s Signalling Circuit), 120 A (For 500 ms Signalling Circuit), 140 A (For 100 ms Signalling Circuit) |
| Shock Resistance | 10 G for 11 ms (Contactor Open), 15 G for 11 ms (Contactor Closed) |
| Electrical Durability | 1.4 Mcycles (80 A, AC-1, Less than 440 V), 1.45 Mcycles (65 A, AC-3, Less than 440 V), 1.45 Mcycles (65 A, AC-3e, Less than 440 V) |
| Max. Temperature | 850°C |
| Operating Time | 4 to 19 ms (Opening), 12 to 26 ms (Closing) |
| Watts Loss | 4 to 5W |
| Fuse Amps | 10 A (Signalling Circuit), 125 A (Type 1 Power Circuit), 125 A (Type 2 Power Circuit) |
| Net Weight | 0.86 kg |
| Inrush VA | 140 VA (at 60 Hz 20°C), 160 VA (at 50 Hz 20°C) |
| Tightening Torque | 1.7 Nm (Control Circuit), 2.5 to 8 Nm (Power Circuit) |
| Rated Making Capacity | 140 A (AC Signalling Circuit), 250 A (DC Signalling Circuit), 1000 A @ 440V (Power Circuit) |
| Operating Speed | 3600 cycles per hr |
| Mounts On | Plate, Rail |
| Switching Current | 5 mA (Signalling Circuit) |
| Includes Protective Cover | Yes |
| Switching Voltage | 17 V (Signalling Circuit) |
| Overall Width | 2.17 in |
| Full Load Current - Resistive | 80 A |
| Embedded Surge Suppressor | No |
| Horsepower @ Three Phase - 240V AC | 20 hp |
| Reversing Capability | Non-Reversing |
| Number of Normally Open Main Contacts | 3 |
| Phase | Three |
| NEMA Enclosure Rating | No Enclosure |
| Maximum Voltage Rating | 690V AC |
| Minimum Operating Temperature | -40 Degrees F |
| Overall Depth | 4.72 in |
| Maximum Operating Temperature | 140 Degrees F |
| Electrical Operating Durability | 1,400,000, 1,450,000 |
| Horsepower @ Three Phase - 600V AC | 50 hp |
| Resistance Properties | Fire Resistant, Insulation Resistant |
| Horsepower @ Three Phase - 208V AC | 20 hp |
| Terminal Connection Type | Screw Clamp Terminals |
| Mounting Style | DIN Rail, Plate |
| Horsepower @ Three Phase - 480V AC | 40 hp |
| Frequency | 50/60 Hz |
| Number of Auxillary Contacts | 2 |
| Contactor Style | IEC |
| NEMA Enclosure Material | Not Applicable |
| Coil Voltage | 24V AC |
| Mechanical Operating Durability | 6,000,000 |
| Includes Auxiliary Contacts | Yes |
| Overall Height | 4.8 in |
| Horsepower @ Single Phase - 240V AC | 10 hp |
| Horsepower @ Single Phase - 120V AC | 5 hp |
| Full Load Current - Inductive | 65 A |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Protective Treatment | THIEC 60068-2-30 |
| Rated Short Time Withstand Current | 640 A 104°F (40°C) - 10 s for power circuit, 900 A 104°F (40°C) - 1 s for power circuit, 110 A 104°F (40°C) - 10 min for power circuit, 260 A 104°F (40°C) - 1 min for power circuit, 100 A - 1 s for signalling circuit, 120 A - 500 ms for signalling circuit, 140 A - 100 ms for signalling circuit |
| Inrush Power in VA | 140 VA 60 Hz cos phi 0.75 (at 68°F (20°C)), 160 VA 50 Hz cos phi 0.75 (at 68°F (20°C)) |
| Product Certifications | UL, CCC, CSA, GOST |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| Conventional Free Air Thermal Current | 10 A (at 140°F (60°C)) for signalling circuit, 80 A (at 140°F (60°C)) for power circuit |
| Contact Compatibility | M2 |
| Power Dissipation Per Pole | 9.6 W AC-1, 6.3 W AC-3, 6.3 W AC-3e |
| Insulation Resistance | Greater than 10 MOhm for signalling circuit |
| Average Impedance | 1.5 mOhm - Ith 80 A 50 Hz for power circuit |
| Heat Dissipation | 4 to 5 W at 50/60 Hz |
| IRMS Rated Making Capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1, 250 A DC for signalling circuit conforming to IEC 60947-5-1, 1000 A at 440 V for power circuit conforming to IEC 60947 |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Auxiliary Contacts Type | Mechanically linked 1 NO + 1 NC IEC 60947-5-1, Mirror contact 1 NC IEC 60947-4-1 |
| Rated Operational Voltage | Power circuit Less than or Equal to 690 V AC 25 to 400 Hz, Power circuit Less than or Equal to 300 V DC |
| Maximum Operating Rate | 3600 cyc/h 140°F (60°C) |
| Flame Retardance | V1 conforming to UL 94 |
| IP Degree Of Protection | IP20 front face IEC 60529 |
| Contactor Application | Motor control, Resistive load |
| Compatibility Code | LC1D |
| Operating Altitude | 0 to 9842.52 ft (0 to 3000 m) |
| Poles Description | 3P |
| Rated Insulation Voltage | Power circuit 600 V CSA, Power circuit 600 V UL, Signalling circuit 690 V IEC 60947-1, Signalling circuit 600 V CSA, Signalling circuit 600 V UL, Power circuit 690 V IEC 60947-4-1 |
| Rated Impulse Withstand Voltage | 6 kV IEC 60947 |
| Fire Resistance | 1562°F (850°C) IEC 60695-2-1 |
| Control Circuit Type | AC 50/60 Hz standard |
| Maximum Horse Power Rating | 40 hp at 460/480 V AC 50/60 Hz for 3 phase motors, 5 hp at 115 V AC 50/60 Hz for 1 phase motors, 10 hp at 230/240 V AC 50/60 Hz for 1 phase motors, 20 hp at 200/208 V AC 50/60 Hz for 3 phase motors, 20 hp at 230/240 V AC 50/60 Hz for 3 phase motors, 50 hp at 575/600 V AC 50/60 Hz for 3 phase motors |
| Motor Power KW | 11 kW at 400 V AC 50/60 Hz (AC-4), 18.5 kW at 220 to 230 V AC 50/60 Hz (AC-3), 30 kW at 380 to 400 V AC 50/60 Hz (AC-3), 37 kW at 500 V AC 50/60 Hz (AC-3), 37 kW at 660 to 690 V AC 50/60 Hz (AC-3), 18.5 kW at 220 to 230 V AC 50/60 Hz (AC-3e), 30 kW at 380 to 400 V AC 50/60 Hz (AC-3e), 37 kW at 500 V AC 50/60 Hz (AC-3e), 37 kW at 660 to 690 V AC 50/60 Hz (AC-3e) |
| Minimum Switching Current | 5 mA for signalling circuit |
| Associated Fuse Rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1, 125 A gG at Less than or Equal to 690 V coordination type 1 for power circuit, 125 A gG at Less than or Equal to 690 V coordination type 2 for power circuit |
| Pole Contact Composition | 3 NO |
| Product Or Component Type | Contactor |
| Utilisation Category | AC-4, AC-1, AC-3, AC-3e |
| Permissible Ambient Air Temperature Around The Device | -40 to 140°F (-40 to 60°C), 140 to 158°F (60 to 70°C) with derating |
| Climatic Withstand | IACS E10 exposure to damp heat, IEC 60947-1 Annex Q category D exposure to damp heat |
| Hold-In Power Consumption in VA | 13 VA 60 Hz cos phi 0.3 (at 68°F (20°C)), 15 VA 50 Hz cos phi 0.3 (at 68°F (20°C)) |
| Connections - Terminals | Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 1 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: solid without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.01 in? (1 to 4 mm?) - cable stiffness: solid without cable end, Power circuit: screw connection 1 0.00 to 0.05 in? (1 to 35 mm?) - cable stiffness: flexible without cable end, Power circuit: screw connection 2 0.00 to 0.04 in? (1 to 25 mm?) - cable stiffness: flexible without cable end, Power circuit: screw connection 1 0.00 to 0.05 in? (1 to 35 mm?) - cable stiffness: flexible with cable end, Power circuit: screw connection 2 0.00 to 0.04 in? (1 to 25 mm?) - cable stiffness: flexible with cable end, Power circuit: screw connection 1 0.00 to 0.05 in? (1 to 35 mm?) - cable stiffness: solid without cable end, Power circuit: screw connection 2 0.00 to 0.04 in? (1 to 25 mm?) - cable stiffness: solid without cable end |
| Control Circuit Voltage | 24 V AC 50/60 Hz |
| Protective Cover | With |
| Rated Operational Current | 80 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-1 for power circuit, 65 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3 for power circuit, 65 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3e for power circuit |
| Mechanical Robustness | Vibrations contactor open 2 Gn, 5 to 300 Hz), Vibrations contactor closed 4 Gn, 5 to 300 Hz), Shocks contactor closed 15 Gn for 11 ms), Shocks contactor open 10 Gn for 11 ms) |
| Mounting Support | Rail, Plate |
| Pollution Degree | 3 |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
IEC Magnetic Contactor, 3 Poles, 24 V AC, 65 A, Reversing: No, SCHNEIDER ELECTRIC, Mfr# LC1D65AB7
$391.87
Free shipping will be applied on orders over $50
IEC Magnetic Contactor, Auxiliary Contact Form 1NO/1NC, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 24V AC, Number of Poles 3, Full Load Current - Inductive 65 A, Full Load Current - Resistive 80 A, Reversing Capability Non-Reversing, Overall Height 4.8 in, Overall Width 2.17 in, Terminal Connection Type Screw Clamp Terminals, Mounting Style DIN Rail, Plate, Series TeSys Deca, Number of Auxillary Contacts 2, Contactor Style IEC
9999 in stock
Must order in multiples of 1
Subtotal:
$391.87
You must be logged in to post a review.
Reviews
There are no reviews yet.