| Item | IEC Magnetic Contactor |
| Full Load Amps-Inductive | 150 A |
| Full Load Amps-Resistive | 200 A |
| Action | Non-Reversing |
| Number of Poles | 3 |
| Coil Volts | 120 V AC |
| Reversing | No |
| Height | 4.33 in |
| Width | 4.33 in |
| HP @ 3 Phase - 208V | 40 hp |
| Depth | 5.12 in |
| HP @ 3 Phase - 575V | 125 hp |
| HP @ 3 Phase - 240V | 50 hp |
| HP @ 3 Phase - 480V | 100 hp |
| Enclosure NEMA Rating | No Enclosure |
| Aux. Contact Configuration | 1NO/1NC |
| Hz | 50/60 |
| Frame / Series / Class / Code | TeSys |
| Auxiliary Contact Form | 1NO/1NC |
| Standards | BV, CCC, CSA, CSA C22.2 No 14, DNV, EN 60947-4-1, EN 60947-5-1, GL, GOST, IEC 60947-4-1, IEC 60947-5-1, LROS, RINA, UKCA, UL 508, UL Listed |
| NEMA Size | Not Applicable |
| Series | TeSys Deca |
| Rated Breaking Capacity | 1400 A @ 440V |
| Mounts On | Plate, Rail |
| Shock Resistance | 15 G for 11 ms (Contactor Closed), 6 G for 11 ms (Contactor Open) |
| Electrical Durability | 0.85 Mcycles (150 A, AC-3, Less than 440 V), 1 Mcycles (200 A, AC-1, Less than 440 V), 0.85 Mcycles (150 A, AC-3e, Less than 440 V) |
| Control Circuit Voltage Limits | Drop-Out AC: 0.3 to 0.5 Uc (at -40 to 70°C 50/60 Hz), Operational AC: 0.8 to 1.15 Uc (at -40-55°C 50/60 Hz), 1 to 1.15 Uc (at 55-70°C 50/60 Hz) |
| Features | Built-In Bi-Directional Peak Limiting Diode Suppressor |
| Inrush VA | 280 to 350 VA |
| Hold VA | 2 to 18 VA |
| IP Rating | IP20 |
| Includes Protective Cover | Yes |
| Max. Temperature | 850°C |
| Tightening Torque | 1.2 Nm (Control Circuit), 12 Nm (Power Circuit) |
| Rated Voltage | 1000V AC, 300V DC |
| Mechanical Durability | 8 Mcycles |
| Application | Motor Control, Resistive Load |
| Environmental Attributes | Mercury Free, PVC Free, Pollution Degree 3 |
| Impedance | 0.6 mOhm |
| Impulse Withstand Voltage | 8 kV |
| Operating Time | 20 to 35 ms (Closing), 40 to 75 ms (Opening) |
| Switching Voltage | 17 V (Signalling Circuit) |
| Insulation Resistance Range | Greater Than 10 MOhms (Signalling Circuit) |
| Rated Short-Time Withstand Current | 250 A (at 40°C for 10 min Power Circuit), 580 A (at 40°C for 1 min Power Circuit), 1200 A (at 40°C for 10 s Power Circuit), 1400 A (at 40°C for 1 s Power Circuit), 100 A (For 1 s Signalling Circuit), 120 A (For 500 ms Signalling Circuit), 140 A (For 100 ms Signalling Circuit) |
| Max. Operating Watts | 40 kW (at 220 to 230V AC 50/60 Hz AC-3), 75 kW (at 380 to 400V AC 50/60 Hz AC-3), 80 kW 415 to (at 440V AC 50/60 Hz AC-3), 90 kW (at 500V AC 50/60 Hz AC-3), 100 kW (at 660 to 690V AC 50/60 Hz AC-3), 75 kW (at 1000V AC 50/60 Hz AC-3), 22 kW (at 400V AC 50/60 Hz AC-4), 40 kW (at 220 to 230V AC 50/60 Hz AC-3e), 75 kW (at 380 to 400V AC 50/60 Hz AC-3e), 80 kW (at 415 to 440V AC 50/60 Hz AC-3e), 90 kW (at 500V AC 50/60 Hz AC-3e), 100 kW (at 660 to 690V AC 50/60 Hz AC-3e), 75 kW (at 1000V AC 50/60 Hz AC-3e) |
| Switching Current | 5 mA (Signalling Circuit) |
| Fire Rating | UL 94 V1 |
| Overvoltage Category | CAT III |
| Vibration Resistance | 4 G (Contactor Closed), 2 G (Contactor Open) |
| Working Height | Up to 9842.52 ft |
| Net Weight | 2.5 kg |
| Rated Insulation Volts | 600/1000V (Power Circuit), 600/690V (Signalling Circuit) |
| Non-Overlap Time | 1.5 ms |
| Electrical Connection | Screw Clamp Terminals |
| Signalling Circuit Frequency | 25 to 400 Hz |
| Watts Loss | 3 to 4.5W |
| Thermal Amperage | 200 A (at 60°C Power Circuit) |
| Fuse Amps | 10 A (Signalling Circuit), 315 A (Type 1 Power Circuit), 250 A (Type 2 Power Circuit) |
| Rated Making Capacity | 140 A (AC Signalling Circuit), 250 A (DC Signalling Circuit), 1660 A @ 440V (Power Circuit) |
| Operating Speed | 1200 cycles per hr |
| Electrical Operating Durability | 1,000,000, 850,000 |
| NEMA Enclosure Material | Not Applicable |
| Embedded Surge Suppressor | Yes |
| Overall Height | 6.22 in |
| Horsepower @ Three Phase - 208V AC | 40 hp |
| Maximum Operating Temperature | 140 Degrees F |
| Reversing Capability | Non-Reversing |
| Number of Auxillary Contacts | 2 |
| Frequency | 50/60 Hz |
| Terminal Connection Type | Screw Clamp Terminals |
| Horsepower @ Single Phase - 240V AC | 3 hp |
| Horsepower @ Three Phase - 240V AC | 50 hp |
| Mounting Style | DIN Rail, Plate |
| Horsepower @ Three Phase - 480V AC | 100 hp |
| Horsepower @ Three Phase - 600V AC | 125 hp |
| Number of Normally Open Main Contacts | 3 |
| NEMA Enclosure Rating | No Enclosure |
| Coil Voltage | 120V AC |
| Maximum Voltage Rating | 1000V AC |
| Full Load Current - Resistive | 200 A |
| Overall Width | 0.47 in |
| Overall Depth | 5.35 in |
| Mechanical Operating Durability | 8,000,000 |
| Full Load Current - Inductive | 150 A |
| Minimum Operating Temperature | -40 Degrees F |
| Resistance Properties | Fire Resistant, Insulation Resistant |
| Phase | Three |
| Contactor Style | IEC |
| Includes Auxiliary Contacts | Yes |
| Rated Operational Current | 200 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-1 for power circuit, 150 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3 for power circuit, 150 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3e for power circuit |
| Control Circuit Type | AC 50/60 Hz |
| Product Or Component Type | Contactor |
| Utilisation Category | AC-3, AC-1, AC-4, AC-3e |
| Inrush Power in VA | 280 to 350 VA 60 Hz cos phi 0.9 (at 68°F (20°C)), 280 to 350 VA 50 Hz cos phi 0.9 (at 68°F (20°C)) |
| Rated Short Time Withstand Current | 250 A 104°F (40°C) - 10 min for power circuit, 580 A 104°F (40°C) - 1 min for power circuit, 1200 A 104°F (40°C) - 10 s for power circuit, 1400 A 104°F (40°C) - 1 s for power circuit, 100 A - 1 s for signalling circuit, 120 A - 500 ms for signalling circuit, 140 A - 100 ms for signalling circuit |
| Motor Power KW | 40 kW at 220 to 230 V AC 50/60 Hz (AC-3), 75 kW at 380 to 400 V AC 50/60 Hz (AC-3), 80 kW at 415 to 440 V AC 50/60 Hz (AC-3), 90 kW at 500 V AC 50/60 Hz (AC-3), 100 kW at 660 to 690 V AC 50/60 Hz (AC-3), 75 kW at 1000 V AC 50/60 Hz (AC-3), 22 kW at 400 V AC 50/60 Hz (AC-4), 40 kW at 220 to 230 V AC 50/60 Hz (AC-3e), 75 kW at 380 to 400 V AC 50/60 Hz (AC-3e), 80 kW at 415 to 440 V AC 50/60 Hz (AC-3e), 90 kW at 500 V AC 50/60 Hz (AC-3e), 100 kW at 660 to 690 V AC 50/60 Hz (AC-3e), 75 kW at 1000 V AC 50/60 Hz (AC-3e) |
| Climatic Withstand | IACS E10 exposure to damp heat |
| Minimum Switching Current | 5 mA for signalling circuit |
| Rated Insulation Voltage | Power circuit 600 V CSA, Power circuit 600 V UL, Power circuit 1000 V IEC 60947-4-1, Signalling circuit 690 V IEC 60947-1, Signalling circuit 600 V CSA, Signalling circuit 600 V UL |
| Rated Impulse Withstand Voltage | 8 kV IEC 60947 |
| Maximum Horse Power Rating | 40 hp at 200/208 V AC 50/60 Hz for 3 phase motors, 50 hp at 230/240 V AC 50/60 Hz for 3 phase motors, 100 hp at 460/480 V AC 50/60 Hz for 3 phase motors, 125 hp at 575/600 V AC 50/60 Hz for 3 phase motors |
| Average Impedance | 0.6 mOhm - Ith 200 A 50 Hz for power circuit |
| Hold-In Power Consumption in VA | 2 to 18 VA 60 Hz cos phi 0.9 (at 68°F (20°C)), 2 to 18 VA 50 Hz cos phi 0.9 (at 68°F (20°C)) |
| Rated Operational Voltage | Power circuit Less than or Equal to 1000 V AC 25 to 400 Hz, Power circuit Less than or Equal to 300 V DC |
| Poles Description | 3P |
| Pollution Degree | 3 |
| Coil Technology | Built-in bidirectional peak limiting diode suppressor |
| Insulation Resistance | Greater than 10 MOhm for signalling circuit |
| Permissible Ambient Air Temperature Around The Device | -40 to 140°F (-40 to 60°C), 140 to 158°F (60 to 70°C) with derating |
| Fire Resistance | 1562°F (850°C) IEC 60695-2-1 |
| Pole Contact Composition | 3 NO |
| Contact Compatibility | M13 |
| Safety Reliability Level | B10d = 684932 cycles contactor with nominal load EN/ISO 13849-1, B10d = 10000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Control Circuit Voltage | 120 V AC 50/60 Hz |
| Protective Treatment | THIEC 60068-2-30 |
| Conventional Free Air Thermal Current | 200 A (at 140°F (60°C)) for power circuit |
| Auxiliary Contacts Type | Mechanically linked 1 NO + 1 NC IEC 60947-5-1, Mirror contact 1 NC IEC 60947-4-1 |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Flame Retardance | V1 conforming to UL 94 |
| Connections - Terminals | Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 1 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible with cable end, Control circuit: screw clamp terminals 1 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: flexible without cable end, Control circuit: screw clamp terminals 1 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: solid without cable end, Control circuit: screw clamp terminals 2 0.00 to 0.00 in? (1 to 2.5 mm?) - cable stiffness: solid without cable end, Power circuit: connector 1 0.02 to 0.19 in? (10 to 120 mm?) - cable stiffness: flexible without cable end, Power circuit: connector 2 0.02 to 0.08 in? (10 to 50 mm?) - cable stiffness: flexible without cable end, Power circuit: connector 1 0.02 to 0.19 in? (10 to 120 mm?) - cable stiffness: flexible with cable end, Power circuit: connector 2 0.02 to 0.08 in? (10 to 50 mm?) - cable stiffness: flexible with cable end, Power circuit: connector 1 0.02 to 0.19 in? (10 to 120 mm?) - cable stiffness: solid without cable end, Power circuit: connector 2 0.02 to 0.08 in? (10 to 50 mm?) - cable stiffness: solid without cable end |
| IP Degree Of Protection | IP20 front face IEC 60529 |
| Mounting Support | Rail, Plate |
| Contactor Application | Motor control, Resistive load |
| Mechanical Robustness | Vibrations contactor open 2 Gn, 5 to 300 Hz), Vibrations contactor closed 4 Gn, 5 to 300 Hz), Shocks contactor closed 15 Gn for 11 ms), Shocks contactor open 6 Gn for 11 ms) |
| Associated Fuse Rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1, 315 A gG at Less than or Equal to 690 V coordination type 1 for power circuit, 250 A gG at Less than or Equal to 690 V coordination type 2 for power circuit |
| Maximum Operating Rate | 1200 cyc/h 140°F (60°C) |
| Compatibility Code | LC1D |
| Product Certifications | GOST, CCC, RINA, DNV, GL, CSA, LROS (Lloyds register of shipping), UL, BV, UKCA, CE |
| Heat Dissipation | 3 to 4.5 W at 50/60 Hz |
| Power Dissipation Per Pole | 24 W AC-1, 13.5 W AC-3, 13.5 W AC-3e |
| Operating Altitude | 0 to 9842.52 ft (0 to 3000 m) |
| IRMS Rated Making Capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1, 250 A DC for signalling circuit conforming to IEC 60947-5-1, 1660 A at 440 V for power circuit conforming to IEC 60947 |
| Protective Cover | With |
| Country of Origin (subject to change) | Czechia |
| Package Quantity | 1 |
IEC Magnetic Contactor, 3 Poles, 120 V AC, 150 A, Reversing: No, SCHNEIDER, Mfr# LC1D150G7
$715,99
-$2.08 / ea
with subscription
Free shipping will be applied on orders over $50
IEC Magnetic Contactor, Auxiliary Contact Form 1NO/1NC, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 120V AC, Number of Poles 3, Full Load Current - Inductive 150 A, Full Load Current - Resistive 200 A, Reversing Capability Non-Reversing, Overall Height 6.22 in, Overall Width 0.47 in, Terminal Connection Type Screw Clamp Terminals, Mounting Style DIN Rail, Plate, Series TeSys Deca, Number of Auxillary Contacts 2, Contactor Style IEC
9999 in stock
Must order in multiples of 1
Subtotal:
$715.99
You must be logged in to post a review.
Reviews
There are no reviews yet.