| Full Load Amps-Inductive | 12 A |
| Item | IEC Magnetic Contactor |
| Full Load Amps-Resistive | 25 A |
| Number of Poles | 3 |
| Coil Volts | 100 to 250 V AC/DC |
| Reversing | No |
| HP @ 1 Phase - 120V | 1/2 hp |
| HP @ 1 Phase - 240V | 2 hp |
| Height | 3.03 in |
| HP @ 3 Phase - 208V | 3 hp |
| Width | 1.77 in |
| HP @ 3 Phase - 575V | 10 hp |
| Depth | 3.38 in |
| HP @ 3 Phase - 240V | 3 hp |
| Enclosure NEMA Rating | No Enclosure |
| HP @ 3 Phase - 480V | 7 1/2 hp |
| Aux. Contact Configuration | 1NO/1NC |
| Hz | 50/60 |
| Frame / Series / Class / Code | TeSys |
| Standards | CCC, CSA, CSA C22.2 No 60947-4-1, DNV-GL, EAC, EN/IEC 60947-4-1, EN/IEC 60947-5-1, IEC 60335-1, KC, LROS, UKCA, UL Listed, UL 60947-4-1 |
| Series | TeSys Deca |
| NEMA Size | Not Applicable |
| Auxiliary Contact Form | 1NO/1NC |
| Fuse Amps | 10 A (Signalling Circuit), 40 A (Type 1 Power Circuit), 25 A (Type 2 Power Circuit) |
| Rated Insulation Volts | 690V |
| Rated Making Capacity | 250 A @ 440V (Power Circuit), 140 A (AC Signalling Circuit), 250 A (DC Signalling Circuit) |
| Switching Current | 5 mA (Signalling Circuit) |
| Shock Resistance | 15 G for 11 ms (Contactor Closed), 10 G for 11 ms (Contactor Open) |
| Watts Loss | 1.1W |
| Includes Protective Cover | Yes |
| Tightening Torque | 1.7 Nm |
| Operating Speed | 3600 cycles per hr |
| Rated Voltage | 690V AC |
| Max. Operating Watts | 3 kW (at 220 to 230V AC 50 Hz AC-3), 5.5 kW (at 380 to 400V AC 50 Hz AC-3), 5.5 kW (at 415V AC 50 Hz AC-3), 5.5 kW (at 440V AC 50 Hz AC-3), 7.5 kW (at 500V AC 50 Hz AC-3), 7.5 kW (at 660 to 690V AC 50 Hz AC-3), 3 kW (at 220 to 230V AC 50 Hz AC-3e), 5.5 kW (at 380 to 400V AC 50 Hz AC-3e), 5.5 kW (at 415V AC 50 Hz AC-3e), 5.5 kW (at 440V AC 50 Hz AC-3e), 7.5 kW (at 500V AC 50 Hz AC-3e), 7.5 kW (at 660 to 690V AC 50 Hz AC-3e) |
| Working Height | Up to 9842.52 ft |
| Fire Rating | UL 94 V1 |
| Impulse Withstand Voltage | 6 kV |
| Rated Breaking Capacity | 250 A @ 440V |
| Control Circuit Voltage Limits | Drop-Out AC/DC: Less Than 0.1 Uc (at -40 to 70°C), Operational AC/DC: 0.85 to 1.1 Uc (at -40 to 60°C), 1 to 1.1 Uc (at 60 to 70°C) |
| Overvoltage Category | CAT III |
| Switching Voltage | 17 V (Signalling Circuit) |
| Inrush VA | 25 VA |
| Mounts On | Plate, Rail |
| Electrical Connection | Screw Clamp Terminals |
| Hold VA | 1.6 VA |
| Rated Short-Time Withstand Current | 100 A (For 1 s Signalling Circuit), 120 A (For 500 ms Signalling Circuit), 140 A (For 100 ms Signalling Circuit), 30 A (at 40°C for 10 min Power Circuit), 61 A (at 40°C for 1 min Power Circuit), 105 A (at 40°C for 10 s Power Circuit), 210 A (at 40°C for 1 s Power Circuit) |
| Net Weight | 0.373 kg |
| Thermal Amperage | 10 A (at 60°C Signalling Circuit), 25 A (at 60°C Power Circuit) |
| Operating Time | 45 to 55 ms (Closing), 20 to 90 ms (Opening) |
| Application | Motor Control, Resistive Load |
| Electrical Durability | 2.3 Mcycles (11 A, AC-3, Less than 440 V), 0.8 Mcycles (25 A, AC-1, Less than 440 V), 2.3 Mcycles (11 A, AC-3e, Less than 440 V) |
| Signalling Circuit Frequency | 25 to 400 Hz |
| Features | Built-In Bi-Directional Peak Limiting |
| Mechanical Durability | 15 Mcycles |
| Impedance | 2.5 mOhm |
| Max. Temperature | 850°C |
| Non-Overlap Time | 1.5 ms |
| Insulation Resistance Range | Greater Than 10 MOhms (Signalling Circuit) |
| Environmental Attributes | Mercury Free, Pollution Degree 3 |
| Vibration Resistance | 4 G (Contactor Closed), 2 G (Contactor Open) |
| IP Rating | IP20 |
| Minimum Operating Temperature | -40 Degrees F |
| Mounting Style | DIN Rail, Plate |
| NEMA Enclosure Rating | No Enclosure |
| Horsepower @ Single Phase - 120V AC | 1/2 hp |
| Overall Depth | 3.39 in |
| Horsepower @ Three Phase - 240V AC | 3 hp |
| Horsepower @ Three Phase - 480V AC | 7 1/2 hp |
| Embedded Surge Suppressor | No |
| Contactor Style | IEC |
| Number of Normally Open Main Contacts | 3 |
| NEMA Enclosure Material | Not Applicable |
| Overall Height | 3.03 in |
| Mechanical Operating Durability | 15,000,000 |
| Number of Auxillary Contacts | 2 |
| Full Load Current - Resistive | 25 A |
| Maximum Operating Temperature | 140 Degrees F |
| Coil Voltage | 100-250V AC/DC |
| Frequency | 50/60 Hz |
| Reversing Capability | Non-Reversing |
| Phase | Three |
| Electrical Operating Durability | 2,300,000, 800,000 |
| Horsepower @ Three Phase - 208V AC | 3 hp |
| Horsepower @ Single Phase - 240V AC | 2 hp |
| Terminal Connection Type | Screw Clamp Terminals |
| Includes Auxiliary Contacts | Yes |
| Full Load Current - Inductive | 12 A |
| Resistance Properties | Fire Resistant, Insulation Resistant |
| Overall Width | 1.77 in |
| Horsepower @ Three Phase - 600V AC | 10 hp |
| Maximum Voltage Rating | 690V AC |
| Country of Origin (subject to change) | France |
| Package Quantity | 1 |
IEC Magnetic Contactor, 3 Poles, 100 to 250 V AC/DC, 12 A, Reversing: No, SCHNEIDER ELECTRIC, Mfr# LC1D12KUE
$44,79
Free shipping will be applied on orders over $50
IEC Magnetic Contactor, Auxiliary Contact Form 1NO/1NC, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 100-250V AC/DC, Number of Poles 3, Full Load Current - Inductive 12 A, Full Load Current - Resistive 25 A, Reversing Capability Non-Reversing, Overall Height 3.03 in, Overall Width 1.77 in, Terminal Connection Type Screw Clamp Terminals, Mounting Style DIN Rail, Plate, Series TeSys Deca, Number of Auxillary Contacts 2, Contactor Style IEC
9999 in stock
Must order in multiples of 1
Subtotal:
$44.79
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.