| Inlet and Outlet Dia. (In.) | 4 |
| Item | Induced Draft Blower |
| Type | High Temperature |
| Voltage | 115 |
| Depth (In.) | 7 in |
| Construction Material | Aluminized Steel Housing and Blower Wheel |
| Amps | 1.26 |
| Includes | Fan Proving Switch, UC1 Universal Control |
| Remarks | View Catalog Page for Selection Criteria |
| Height (In.) | 7 7/8 in |
| Vent Pipe Dia. (In.) | 4 or 6 |
| Agency Compliance | ETL Listed to UL378 and CAN3-B255-M81 |
| Width (In.) | 11 in |
| Application | Boilers, Water Heaters |
| Watts | 95 W |
| CFM @ 0.700-In. SP | 100 |
| SP @ 270 Deg. (F) | N/A. |
| CFM @ 0.000-In. SP | 155 |
| SP @ 390 Deg. (F) | N/A. |
| Duct Temp. Deg. (F) | 70,300,400,500 |
| CFM @ 1.000-In. SP | 20--- |
| BtuH Input | 125-250 |
| Heater Btu Input @ 270 (F) | N/A. |
| CFM @ 1.40-In. SP | ---- |
| SP @ 530 Deg. (F) | N/A. |
| Heater Btu Input @ 530 (F) | N/A. |
| CFM @ 0.500-In. SP | 118 |
| Heater Btu Input @ 390 (F) | N/A. |
| Standards | cETL Listed |
| For Use With | Power Venter |
| Overall Height | 7 5/8 in |
| Overall Width | 11 in |
| Overall HxWxD | 7 5/8 in x 11 in x 7 in |
| Outlet Shape | Round |
| Airflow at Temperature | 115 cfm @ 70 Degrees F, 12 cfm @ 70 Degrees F, 158 cfm @ 70 Degrees F, 95 cfm @ 70 Degrees F |
| For Maximum Pipe Length | 100 ft |
| Housing Material Finish | Aluminum Plated |
| Outlet Diameter | 4 in |
| For Fuel Type | LP, Natural Gas, Oil |
| For Pipe Diameter | 4 in to 6 in |
| Maximum Heat Input | 250 MBtuH |
| Current | 1.26 A |
| Maximum Vent Pipe Diameter | 6 in |
| For Appliance Type | Boilers, Furnaces, Unit Heaters, Water Heaters |
| Blower Type | Sidewall Power Venter |
| Maximum Motor Speed | 3,000 RPM |
| Outlet Width | Not Applicable |
| Maximum Heater BTU Input for Oil Appliance | 200,000 BtuH |
| Power Consumption | 95 W |
| Maximum Static Pressure | 1 3/8 in wc |
| Housing Material | Steel |
| Minimum Vent Pipe Diameter | 4 in |
| Overall Depth | 7 in |
| Nameplate Voltage | 115V AC |
| Outlet Height | Not Applicable |
| Airflow @ 0.000 in SP | 158 cfm |
| Includes Motor | Yes |
| Maximum Heater BTU Input for Gas Appliance | 300,000 BtuH |
| Market | Commercial, Residential |
| Nominal Voltage | 115V AC |
| Inlet Diameter | 4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Induced Draft Blower, 115, Aluminized Steel Housing and Blower Wheel, TJERNLUND PRODUCTS, Mfr# HS1
$410,99
-$12.33 / ea
with subscription
Free shipping will be applied on orders over $50
Induced Draft Blower, Application Boilers, Water Heaters, For Fuel Type LP, Natural Gas, Oil, For Appliance Type Boilers, Furnaces, Unit Heaters, Water Heaters, Maximum Vent Pipe Diameter 6 in, Minimum Vent Pipe Diameter 4 in, Maximum Heater BTU Input for Gas Appliance 300,000 BtuH, Maximum Heater BTU Input for Oil Appliance 200,000 BtuH, Inlet Diameter 4 in, Outlet Diameter 4 in, Nameplate Voltage 115V AC, Current 1.26 A, Maximum Motor Speed 3,000 RPM, Maximum Static Pressure 1 3/8 in wc
9999 in stock
Must order in multiples of 1
Subtotal:
$410.99
You must be logged in to post a review.
Reviews
There are no reviews yet.