Item
Interface plug-in relay,12 A,1 CO,230
AC Contact Rating - Relay
12A @ 250V AC
DC Contact Rating - Relay
12A @ 28V DC
Contact Form - Relay
1 C/O
Power Consumption - Relay
0.75 VA
Contact Material
Silver Alloy (AgNi)
Standards
CSA C22.2 No 14; EN/IEC 61810-1; UL 508; CE; EAC
Current Rating
12 A AC-1/DC-1) NO IEC; 6 A AC-1/DC-1) NC IEC
Switching Voltage
12/300 V DC
Operating Time
20 ms operating || 20 ms reset
Series
RSB; interface relay
Operating Temp. Range
-40-70°C AC)
Dielectric Strength
1000 V AC between contacts; 2500 V AC between poles; 5000 V AC between coil and contact
Switching Power
Max 3000 VA/336 W; Min 120 mW 10 mA, 12 V
Range of Product
Harmony Electromechanical Relays
Operating Position
any position
Maximum Switching Voltage
300 V DC IEC
Average Resistance
33000 Ohm AC 20°C +/- 10 %
Ambient Air Temperature For Operation
-40-70°C AC)
Test Levels
level A group mounting
Shock Resistance
10 gn 11 ms) not operating IEC 60068-2-27, 5 gn 11 ms) in operation IEC 60068-2-27
Maximum Switching Capacity
3000 VA/336 W
Control Type
without push-button
Device Presentation
complete product
Electrical Durability
100000 cycles, 12 A at 250 V, AC-1 NO, 100000 cycles, 6 A at 250 V, AC-1 NC
Operating Rate
u003c= 600 cycles/hour under load, u003c= 18000 cycles/hour no-load
Drop-Out Voltage Threshold
u003e= 0.15 Uc AC
[Ie] Rated Operational Current
12 A AC-1/DC-1) NO IEC, 6 A AC-1/DC-1) NC IEC
Minimum Switching Capacity
120 mW 10 mA, 12 V
Mechanical Durability
10000000 cycles
Contact Operation
standard
Minimum Switching Current
10 mA
Ambient Air Temperature For Storage
-40-85°C
Vibration Resistance
+/- 1 mm 10-55 Hz)IEC 60068-2-6
[Ue] Rated Operational Voltage
184...345 V AC 50/60 Hz
Average Coil Consumption
0.75 VA AC
Series Name
interface relay
Ip Degree of Protection
IP40 conforming to IEC 60529
[Ui] Rated Insulation Voltage
400 V IEC 60947
[Uc] Control Circuit Voltage
230 V AC 50/60 Hz
Load Current
12 A 250 V AC, 12 A 28 V DC
[Ithe] Conventional Enclosed Thermal Current
12 A -40-40°C
Product or Component Type
plug-in relay
[Uimp] Rated Impulse Withstand Voltage
3.6 kV IEC 61000-4-5
Country of Origin (subject to change)
Austria
