| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJCC51 |
| Bore Dia. | 14 mm |
| Keyway Size Type | 5mm x 2.3mm |
| Material - Hubs | Aluminum |
| Outside Dia. | 50.8 mm |
| Assembled Coupling Length | 61 mm |
| Item | Jaw Coupling Hub |
| Material | Aluminum |
| Overall Length | 61 mm |
| Keyway Size | 5mm x 2.3mm |
| Size | MJCC51 |
| Jaw Profile | Curved |
| Maximum Operating Temperature | 82 Degrees C |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Keyway Width | 5 mm |
| Bore Diameter | 14 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Included Screws | Hex Socket Cap Screw |
| Bore Type | Round Bore with Keyway |
| System of Measurement | Metric |
| Bore Tolerance | +0.05/-0.00 mm |
| Hub Material Finish | Bright |
| Screw Material | Alloy Steel |
| Length through Bore | 20.8 mm |
| Keyway Depth | 2.3 mm |
| Hub Diameter | 50.8 mm |
| Hub Material | Aluminum |
| Coupling Overall Length | 61 mm |
| Hub Material Grade | 2024 |
| Outside Diameter | 50.8 mm |
| Screw Material Finish | Black Oxide |
| Screw Thread Size | M5 |
| Minimum Operating Temperature | -23 Degrees C |
| Full Bearing Support Required | Yes |
| Number of Locking Screws | 1 |
| Fail Safe | Yes |
| Weight | 0.3 lb |
| Maximum Speed | 8,000 RPM |
| Zero Backlash | Yes |
| Shaft Locking Type | Clamp On |
| Hub Projection | 20.8 mm |
| Recommended Hub Gap | 1.3 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 14mm, Aluminum, RULAND, Mfr# MJCC51-14-A
$83,99
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJC51, Outside Diameter 50.8 mm, Coupling Overall Length 61 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth 2.3 mm, Keyway Width 5 mm, Bore Diameter 14 mm, Shaft Locking Type Clamp On, Bore Type Round Bore with Keyway, Jaw Profile Curved, Screw Thread Size M5, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 50.8 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.