| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJSC51 |
| Bore Dia. | 14 mm |
| Keyway Size Type | 5mm x 2.3mm |
| Material - Hubs | Aluminum |
| Outside Dia. | 50.8 mm |
| Assembled Coupling Length | 61 mm |
| Size | MJSC51 |
| Item | Jaw Coupling Hub |
| Keyway Size | 5mm x 2.3mm |
| Overall Length | 61 mm |
| Material | Aluminum |
| Hub Material Finish | Bright |
| Outside Diameter | 50.8 mm |
| Length through Bore | 20.8 mm |
| Recommended Hub Gap | 1.3 mm |
| Keyway Width | 5 mm |
| Hub Material | Aluminum |
| Hub Projection | 20.8 mm |
| Bore Diameter | 14 mm |
| Minimum Operating Temperature | -23 Degrees C |
| Full Bearing Support Required | Yes |
| Bore Type | Round Bore with Keyway |
| Keyway Depth | 2.3 mm |
| Screw Material Finish | Black Oxide |
| Number of Locking Screws | 2 |
| Hub Diameter | 50.8 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Hub Material Grade | 2024 |
| Weight | 0.3 lb |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Screw Material | Alloy Steel |
| Coupling Overall Length | 61 mm |
| Zero Backlash | Yes |
| Jaw Profile | Curved |
| Included Screws | (2) Set Screw |
| Screw Thread Size | M6 |
| Fail Safe | Yes |
| Bore Tolerance | +0.05/-0.00 mm |
| Shaft Locking Type | Set Screw |
| Maximum Speed | 8,000 RPM |
| Maximum Operating Temperature | 82 Degrees C |
| System of Measurement | Metric |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 14mm, Aluminum, RULAND, Mfr# MJSC51-14-A
$74,99
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS51, Outside Diameter 50.8 mm, Coupling Overall Length 61 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth 2.3 mm, Keyway Width 5 mm, Bore Diameter 14 mm, Shaft Locking Type Set Screw, Bore Type Round Bore with Keyway, Jaw Profile Curved, Screw Thread Size M6, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 50.8 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.