| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJSC57 |
| Bore Dia. | 14 mm |
| Keyway Size Type | 5mm x 2.3mm |
| Material - Hubs | Aluminum |
| Outside Dia. | 57.2 mm |
| Assembled Coupling Length | 80 mm |
| Overall Length | 80 mm |
| Material | Aluminum |
| Keyway Size | 5mm x 2.3mm |
| Size | MJSC57 |
| Item | Jaw Coupling Hub |
| Bore Tolerance | +0.05/-0.00 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Screw Material Finish | Black Oxide |
| Screw Thread Size | M8 |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Keyway Width | 5 mm |
| Jaw Profile | Curved |
| Coupling Overall Length | 80 mm |
| Hub Material Finish | Bright |
| System of Measurement | Metric |
| Screw Material | Alloy Steel |
| Fail Safe | Yes |
| Hub Material Grade | 2024 |
| Maximum Operating Temperature | 82 Degrees C |
| Recommended Hub Gap | 1.3 mm |
| Included Screws | (2) Set Screw |
| Maximum Speed | 8,000 RPM |
| Minimum Operating Temperature | -23 Degrees C |
| Bore Type | Round Bore with Keyway |
| Hub Projection | 28.7 mm |
| Full Bearing Support Required | Yes |
| Hub Material | Aluminum |
| Bore Diameter | 14 mm |
| Number of Locking Screws | 2 |
| Length through Bore | 28.7 mm |
| Zero Backlash | Yes |
| Hub Diameter | 57.2 mm |
| Keyway Depth | 2.3 mm |
| Outside Diameter | 57.2 mm |
| Weight | 0.5 lb |
| Shaft Locking Type | Set Screw |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 14mm, Aluminum, RULAND, Mfr# MJSC57-14-A
$105,99
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJS57, Outside Diameter 57.2 mm, Coupling Overall Length 80 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth 2.3 mm, Keyway Width 5 mm, Bore Diameter 14 mm, Shaft Locking Type Set Screw, Bore Type Round Bore with Keyway, Jaw Profile Curved, Screw Thread Size M8, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 57.2 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.