| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJC41 |
| Bore Dia. | 14 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 1.63 in |
| Assembled Coupling Length | 53 mm |
| Material | Aluminum |
| Size | MJC41 |
| Item | Jaw Coupling Hub |
| Keyway Size | None |
| Overall Length | 53 mm |
| Coupling Size | MJC41 |
| Hub Material Finish | Bright |
| Screw Thread Size | M4 |
| Keyway Width | Not Applicable |
| Hub Material Grade | 2024-T351 |
| System of Measurement | Metric |
| Full Bearing Support Required | Yes |
| Length through Bore | 18 mm |
| Screw Material | Alloy Steel |
| Coupling Overall Length | 53 mm |
| Maximum Speed | 8,000 RPM |
| Bore Diameter | 14 mm |
| Maximum Operating Temperature | 82 Degrees C |
| Minimum Operating Temperature | -23 Degrees C |
| Zero Backlash | Yes |
| Hub Diameter | 41.3 mm |
| Bore Tolerance | +0.05/-0.00 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Number of Locking Screws | 1 |
| Jaw Profile | Curved |
| Shaft Locking Type | Clamp On |
| Hub Material | Aluminum |
| Keyway Depth | Not Applicable |
| Outside Diameter | 41.3 mm |
| Hub Projection | 18 mm |
| Fail Safe | Yes |
| Recommended Hub Gap | 1.3 mm |
| Bore Type | Round Bore |
| Screw Material Finish | Black Oxide |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS3 Compliant |
| Weight | 0.1 lb |
| Included Screws | Hex Socket Cap Screw |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Cplg Hub, Bore Dia 14 mm, Size MJC41, RULAND, Mfr# MJC41-14-A
$43,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJC41, Outside Diameter 41.3 mm, Coupling Overall Length 53 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 14 mm, Shaft Locking Type Clamp On, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M4, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 41.3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$43.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.