| Type | Step Pulley R8 |
| Table Size (In.) | 9 x 42 |
| Voltage | 230V |
| Item | Knee/Column Milling Machine |
| Motor HP | 2 |
| Phase | 3 |
| Longitudinal Travel | 23-7/8 in |
| Cross Travel | 12-1/2 in |
| Longitudinal Travel (In.) | 23.87 |
| Cross Travel (In.) | 12-1/2 |
| Knee Travel (In.) | 14-1/2 |
| Spindle Taper | R-8 |
| Includes | One Shot Lubrication System, Way Covers, Draw Bar, Tool Box with Tools, and Tolerance Test Sheet |
| Features | Meehanite Casting, Precision Bored and Honed Milling Head, Large Diameter Quill Is Chromed, High Precision Class 7 Spindle Bearings, Spindle Head Is Internally Cooled, Satin Chrome Finished Dials, Heavy-Duty Splined Motor Drive, One-Piece Quill Pinion and Shaft, Three-Stage Power Downfeed with Automatic Stop, Heavy-Duty Spindle Brake, Precision Hardened and Ground Ways and Table, Adjustable Gibs Throughout, Internally Coolant Tank Built Into Casting Base for Use with Coolant System (Coolant Pump Not Included) |
| Overall Height | 82 in |
| Quill Travel (In.) | 5 |
| Overall Depth | 57 in |
| Quill Dia. (In.) | 3-3/8 |
| Feed Rate for Power Down Feed (In.) | 0.0015, 0.003, 0.006 |
| Number of T-Slots | 3 |
| Max. Table Weight (lbs.) | 550 |
| Quill Dia. | 3 3/8 in |
| T-Slot Size (In.) | 0 3/8 |
| Head Angle Front/Back (Deg.) | 45 |
| Spindle Speed (RPM) | 80 to 5440 |
| Head Angle (Deg.) | 90 |
| Ram Travel (In.) | 13-3/8 |
| Hz | 60 |
| Spindle to Table (In.) | 17-1/2 |
| Overall Width | 57 |
| Left-Hand Head Tilt | 90 Degrees |
| Forward Head Tilt | 45 Degrees |
| Number of Spindle Speeds | 16 |
| Overall Length | 64 in |
| Table Width | 42 in |
| Right-Hand Head Tilt | 90 Degrees |
| Min. Spindle Speed | 80 RPM |
| Horsepower | 2 hp |
| Table Load Capacity | 550 lb |
| Max. Spindle to Table Distance | 17 1/2 in |
| Min. Spindle to Column Distance | 4-1/2 in |
| Spindle Taper Size | R-8 |
| Backward Head Tilt Adjustment | 45 Degrees |
| Max. Spindle To Column Distance | 19 in |
| Ram Travel Length | 13-3/8 in |
| Spindle Travel Length | 5 in |
| Table Length | 9 in |
| Max. Spindle Speed | 5,440 RPM |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 1 |
Variable Speed Milling Machine, 2 HP, 230V, JET, Mfr# 690161
$16149,00
Free shipping will be applied on orders over $50
Knee/Column Milling Machine, Table Length 9 in, Table Width 42 in, 2 hp, Table Load Capacity 550 lb, Phase 3, Voltage 230V, Longitudinal Travel 23-7/8 in, Cross Travel 12-1/2 in, Min. Spindle Speed 80 RPM, Max. Spindle Speed 5,440 RPM
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.