| Item | Lathe |
| Swing Over Cross Slide (In.) | 11 |
| Longitudinal Feed Rates | 122 |
| Distance Between Centers (In.) | 60 |
| Thread Range (In.) | 1-5/8 to 72 |
| Carriage Travel (In.) | 55 |
| Spindle Taper | MT-7 |
| Voltage | 230/460V AC |
| Cross Feed Rates | 122 |
| Tailstock Travel (In.) | 5 |
| Tailstock Taper | MT3 |
| Spindle Bore (In.) | 3-1/8 |
| Cross Travel (In.) | 9 |
| Overall Width | 44 in |
| Gap Length (In.) | 12 |
| Phase | Three |
| Number of Threads (mm) | 24 |
| Spindle Speed (RPM) | 25 to 1800 |
| Includes | (5) 12 in Faceplates, 10 in 3 Jaw Scroll Chuck with Top Reversing Jaws, Acu-Rite 300S DRO, Articulating LED Work Lamp, Centrally Located Controls with Jog Button, E-Stop on Carriage, Electronic Chuck Key Holder, Fitted Top Mats to Hold Tooling, Follow Rest, Foot Brake, Full Length Splash Guard and Coolant Return, Fully Integrated Coolant System, Large Capacity Steady Rest with Ball Bearing Tips, Live Center, Mounting Pads and Levelers, Quick Change Tool Post Set, Threading Dial, Tolerance Test Certificate, Tool Box and Adjusting Tools |
| Swing Over Bed (In.) | 18 |
| Overall Height | 116 in |
| Thread Range (mm) | .05 to 20 |
| Swing In Gap (In.) | 27-1/2 |
| Number of Spindle Speeds | 12 |
| Number of Threads (In.) | 61 |
| Motor HP | 7-1/2 |
| Overall Length | 116 in |
| Compound Travel (In.) | 5-1/8 |
| Features | 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings |
| Application | Turning |
| Min. Metric Thread | 0.05 mm |
| Min. Cross Feed | 0.0006 in |
| Spindle Nose Type | D1-4 Camlock |
| Bed Width | 13 1/8 in |
| Min. Threads per Inch | 1 5/8 |
| Max. Metric Thread | 20 mm |
| Number of Inch Threads | 61 |
| Swing In Gap | 27 1/2 in |
| Spindle Bore | 3 1/8 in |
| Max. Cross Feed | 0.0360 in |
| Max. Spindle Speed | 1,800 RPM |
| Number of Metric Threads | 24 |
| Gap Length | 12 in |
| Min. Spindle Speed | 25 RPM |
| Distance Between Centers | 60 in |
| Max. Threads per Inch | 72 |
| Swing Over Cross Slide | 11 in |
| Horsepower | 7 1/2 hp |
| Swing Over Bed | 18 in |
| Frequency | 60 Hz |
| Sound Level | 88 dB |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Large Spindle Bore Lathe, 7-1/2HP, 3P, JET, Mfr# 321960
$28849,00
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 60 in, Voltage 230/460V AC, Horsepower 7 1/2 hp, Min. Spindle Speed 25 RPM, Application Turning, Overall Height 116 in, Overall Length 116 in, Overall Width 44 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
9999 in stock
Must order in multiples of 1
Subtotal:
$28849
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.