Item | Lathe |
Gap Length (In.) | 12-1/4 |
Spindle Bore (In.) | 3-1/8 |
Includes | (5) 12 in Faceplates, 10 in 3 Jaw Scroll Chuck with Top Reversing Jaws, Acu-Rite 300S DRO, Articulating LED Work Lamp, Centrally Located Controls with Jog Button, E-Stop on Carriage, Electronic Chuck Key Holder, Fitted Top Mats to Hold Tooling, Follow Rest, Foot Brake, Full Length Splash Guard and Coolant Return, Fully Integrated Coolant System, Large Capacity Steady Rest with Ball Bearing Tips, Live Center, Mounting Pads and Levelers, Quick Change Tool Post Set, Threading Dial, Tolerance Test Certificate, Tool Box and Adjusting Tools |
Swing Over Cross Slide (In.) | 7-5/8 |
Cross Travel (In.) | 9 |
Number of Threads (mm) | 24 |
Overall Width | 40 in |
Phase | Three |
Motor HP | 7-1/2 |
Number of Threads (In.) | 61 |
Overall Length | 97 1/2 in |
Spindle Taper | MT-7 |
Bed Width (In.) | 13-3/8 |
Longitudinal Feed Rates | 122 |
Distance Between Centers (In.) | 40 |
Compound Travel (In.) | 5-1/8 |
Swing Over Bed (In.) | 14 |
Cross Feed Rates | 122 |
Carriage Travel (In.) | 35 |
Thread Range (mm) | 0.05 to 20 |
Tailstock Taper | MT5 |
Overall Height | 21 1/4 in |
Tailstock Travel (In.) | 5 |
Number of Spindle Speeds | 12 |
Voltage | 230/460V AC |
Swing In Gap (In.) | 23-5/8 |
Features | 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSI Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings, Newall DP700 DRO |
Spindle Speed (RPM) | 42 to 1800 |
Thread Range (In.) | 1-5/8 to 72 |
Application | Turning |
Spindle Bore | 3 1/8 in |
Max. Metric Thread | 20 mm |
Distance Between Centers | 40 in |
Swing Over Bed | 14 in |
Max. Threads per Inch | 30 |
Number of Inch Threads | 61 |
Swing In Gap | 23 5/8 in |
Gap Length | 12 1/4 in |
Horsepower | 7 1/2 hp |
Bed Width | 13 3/8 in |
Swing Over Cross Slide | 7 5/8 in |
Max. Spindle Speed | 1,800 RPM |
Max. Cross Feed | 0.0360 in |
Min. Metric Thread | 0.05 mm |
Min. Spindle Speed | 42 RPM |
Min. Threads per Inch | 2 |
Number of Metric Threads | 24 |
Min. Cross Feed | 0.0006 in |
Spindle Nose Type | D1-8 Camlock |
Frequency | 60 Hz |
Sound Level | 88 dB |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Lathe, 7-1/2 HP, 230/460V, JET, Mfr# 321470
$31239,00
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 40 in, Voltage 230/460V AC, Horsepower 7 1/2 hp, Min. Spindle Speed 42 RPM, Application Turning, Overall Height 21 1/4 in, Overall Length 97 1/2 in, Overall Width 40 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT5, Spindle Nose Type D1-8 Camlock
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.