| Item | Lathe |
| Longitudinal Feed Rates | 0.002 to 0.067 |
| Includes | (2) 5MT Dead Centers, 4 Jaw Chuck, 4-Way Tool Post, Chuck, Digital Readout, DRO, Follower Rest, Inch, Metric Gears for Threading, Splash Guard, Steady Rest, Tool Post Safety Guard, Work Light |
| Swing Over Cross Slide (In.) | 10-1/2 |
| Gap Length (In.) | 9-1/2 |
| Overall Length | 128 in |
| Thread Range (In.) | 112 to 2 |
| Spindle Bore (In.) | 3-1/8 |
| Carriage Travel (In.) | 11 |
| Features | Emergency Stop Push Button, Ground Bed Guide Ways, Ground Toothed Wheels, Hardended, Hardened, Lockable Main Switch, Mechaincal Longitudinal Feed Switch Off, Protective Motor Switch, Shafts Running |
| Primary Application | Metal Turning |
| Swing Over Bed (In.) | 18 |
| Overall Height | 63 in |
| Distance Between Centers (In.) | 80 |
| Coolant Tank Capacity | Not Rated |
| Hz | 60 |
| Bed Width (In.) | 11-3/4 |
| Swing In Gap (In.) | 18-3/4 |
| Number of Threads (In.) | 40 |
| Tailstock Travel (In.) | 5 |
| Cross Feed Rates | 0.001 to 0.033 |
| Cross Travel (In.) | 28 |
| Tailstock Taper | MT4 |
| Spindle Speed (RPM) | 30 to 2400 |
| Number of Threads (mm) | 53 |
| Number of Spindle Speeds | 12 |
| Compound Travel (In.) | 1-1/4 |
| Voltage | 460V AC |
| Spindle Taper | MT-6 |
| Motor HP | 7-1/2 |
| Overall Width | 49 in |
| Phase | Three |
| Thread Range (mm) | 0.10 to 14 |
| Application | Metal Turning |
| Swing Over Bed | 18 in |
| Max. Spindle Speed | 2,400 RPM |
| Spindle Bore | 3 1/8 in |
| Min. Metric Thread | 0.10 mm |
| Swing In Gap | 27 in |
| Min. Spindle Speed | 30 RPM |
| Number of Inch Threads | 40 |
| Gap Length | 9 1/2 in |
| Max. Metric Thread | 14 mm |
| Min. Threads per Inch | 2 |
| Distance Between Centers | 80 in |
| Bed Width | 11 3/4 in |
| Max. Threads per Inch | 112 |
| Swing Over Cross Slide | 10 1/2 in |
| Max. Cross Feed | 0.0330 in |
| Number of Metric Threads | 53 |
| Horsepower | 7 1/2 hp |
| Min. Cross Feed | 0.0010 in |
| Frequency | 60 Hz |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Lathe, Metal Turning, 7-1/2 Motor HP, 60 Hz, DAYTON, Mfr# 484N95
$50811,99
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 80 in, Voltage 460V AC, Horsepower 7 1/2 hp, Min. Spindle Speed 30 RPM, Application Metal Turning, Overall Height 63 in, Overall Length 128 in, Overall Width 49 in, Max. Spindle Speed 2,400 RPM, Tailstock Taper MT4
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.