Item | Lathe |
Spindle Taper | MT-5 |
Carriage Travel (In.) | 72-1/2 |
Number of Threads (In.) | 48 |
Voltage | 230V AC |
Overall Width | 46 in |
Features | 4-1/8 in Spindle Boreclutch Operated Headstock with All Headstock Gears Hardened and Grounduniversal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Requiredmeehanite Castings are Used for Added Durability.Bed Ways are Induction Hardened and Ground for Durability.Full Length Splash Guardheavy-Duty Tailstock and Quillrapid Power Traverse to Cross Slide and Carriagesiemens Electricsstandard Equipment: |
Motor HP | 10 |
Cross Travel (In.) | 12-3/32 |
Tailstock Travel (In.) | 6 |
Gap Length (In.) | 8 |
Swing Over Cross Slide (In.) | 16-1/2 |
Cross Feed Rates | 65 |
Thread Range (mm) | 1 to 14 |
Longitudinal Feed Rates | 65 |
Compound Travel (In.) | 5-1/2 |
Spindle Bore (In.) | 4-1/8 |
Swing In Gap (In.) | 34 |
Swing Over Bed (In.) | 26 |
Phase | Three |
Overall Height | 144 in |
Spindle Speed (RPM) | 36 to 1600 |
Tailstock Taper | MT3 |
Number of Threads (mm) | 22 |
Thread Range (In.) | 2 to 30 |
Number of Spindle Speeds | 12 |
Includes | (2) Steady Rests with Roller Bearings, (5) Large Capacity Steady Rests with Ball Bearing Tips, 12 in 3 Jaw Scroll Chuck, Drive Plate, E-Stop on Carriage, Electronic Chuck Key Holder, Faceplate, Follow Rest, Fully Integrated Coolant System, LED Work Lamp, Micro-Carriage Bed Stop, Quick Change Tool Post Set |
Overall Length | 136 in |
Distance Between Centers (In.) | 80 |
Application | Turning |
Swing Over Cross Slide | 16 1/2 in |
Spindle Nose Type | D1-4 Camlock |
Distance Between Centers | 80 in |
Frequency | 60 Hz |
Max. Metric Thread | 14 mm |
Max. Spindle Speed | 1,600 RPM |
Spindle Bore | 4 1/8 in |
Number of Metric Threads | 22 |
Min. Metric Thread | 1 mm |
Max. Cross Feed | 0.0404 in |
Current | 0.54/0.27 A (Coolant Pump Motor), 2.85/1.65 A (Feed Motor), 25.4/12.7 A (Main Motor) |
Min. Spindle Speed | 36 RPM |
Swing In Gap | 34 in |
Horsepower | 10 hp |
Min. Cross Feed | 0.010 in |
Max. Threads per Inch | 80 |
Min. Threads per Inch | 3 1/2 |
Swing Over Bed | 26 in |
Gap Length | 8 in |
Number of Inch Threads | 48 |
Sound Level | 88 dB |
Bed Width | 9 1/2 in |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Geared Head Lathe, 10HP, 3P, 80 Center In, JET, Mfr# 321860
$46349,00
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 80 in, Voltage 230V AC, Horsepower 10 hp, Min. Spindle Speed 36 RPM, Application Turning, Overall Height 144 in, Overall Length 136 in, Overall Width 46 in, Max. Spindle Speed 1,600 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
9999 in stock
Must order in multiples of 1
Subtotal:
$46349
You must be logged in to post a review.
Reviews
There are no reviews yet.