| Item | Lathe |
| Motor HP | 10 |
| Number of Spindle Speeds | 12 |
| Tailstock Taper | MT5 |
| Spindle Taper | MT-5 |
| Includes | (2) Steady Rests with Roller Bearings, (5) Large Capacity Steady Rests with Ball Bearing Tips, 12 in 3 Jaw Scroll Chuck, Drive Plate, E-Stop on Carriage, Electronic Chuck Key Holder, Faceplate, Follow Rest, Fully Integrated Coolant System, LED Work Lamp, Micro-Carriage Bed Stop, Quick Change Tool Post Set |
| Cross Travel (In.) | 12-3/32 |
| Number of Threads (mm) | 22 |
| Voltage | 230/460V AC |
| Swing In Gap (In.) | 34 |
| Tailstock Travel (In.) | 6 |
| Overall Length | 178 in |
| Gap Length (In.) | 8 |
| Longitudinal Feed Rates | 65 |
| Features | 4-1/8 in Spindle Boreclutch Operated Headstock with All Headstock Gears Hardened and Grounduniversal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Requiredmeehanite Castings are Used for Added Durability.Bed Ways are Induction Hardened and Ground for Durability.Full Length Splash Guardheavy-Duty Tailstock and Quillrapid Power Traverse to Cross Slide and Carriagesiemens Electricsstandard Equipment:With Newall Dp700 Dro |
| Swing Over Bed (In.) | 26 |
| Swing Over Cross Slide (In.) | 16-1/2 |
| Phase | Three |
| Compound Travel (In.) | 5-1/2 |
| Cross Feed Rates | 65 |
| Number of Threads (In.) | 48 |
| Overall Width | 43 in |
| Spindle Bore (In.) | 4-1/8 |
| Spindle Speed (RPM) | 36 to 1600 |
| Thread Range (mm) | 1 to 14 |
| Overall Height | 31 1/2 in |
| Carriage Travel (In.) | 108-1/4 |
| Thread Range (In.) | 2 to 30 |
| Distance Between Centers (In.) | 120 |
| Application | Turning |
| Number of Inch Threads | 48 |
| Min. Threads per Inch | 2 |
| Max. Cross Feed | 0.0404 in |
| Min. Metric Thread | 1 mm |
| Gap Length | 8 in |
| Max. Metric Thread | 14 mm |
| Bed Width | 8 in |
| Current | 0.54/0.27 A (Coolant Pump Motor), 2.85/1.65 A (Feed Motor), 25.4/12.7 A (Main Motor) |
| Swing In Gap | 34 in |
| Max. Threads per Inch | 30 |
| Swing Over Bed | 26 in |
| Spindle Nose Type | D1-8 Camlock |
| Number of Metric Threads | 22 |
| Max. Spindle Speed | 1,600 RPM |
| Horsepower | 10 hp |
| Spindle Bore | 4 1/8 in |
| Min. Spindle Speed | 36 RPM |
| Swing Over Cross Slide | 16 1/2 in |
| Distance Between Centers | 120 in |
| Frequency | 60 Hz |
| Min. Cross Feed | 0.0040 in |
| Sound Level | 88 dB |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Lathe, 10 HP, 230/460V, JET, Mfr# 321891
$53349,00
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 120 in, Voltage 230/460V AC, Horsepower 10 hp, Min. Spindle Speed 36 RPM, Application Turning, Overall Height 31 1/2 in, Overall Length 178 in, Overall Width 43 in, Max. Spindle Speed 1,600 RPM, Tailstock Taper MT5, Spindle Nose Type D1-8 Camlock
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.