| Property | Value |
|---|---|
| Item | Lathe |
| Primary Application | Metal Turning |
| Motor HP | 15 |
| Phase | Three |
| Voltage | 220V AC |
| Frequency | 60 Hz |
| Swing Over Bed (In.) | 22 |
| Distance Between Centers | 40 in |
| Horsepower | 15 hp |
| Spindle Bore (In.) | 4-47/64 |
| Overall Height | 50 in |
| Coolant Tank Capacity | 10 gal. |
| Includes | (4) Jaw 16 in Chucks, 20 in Faceplate, 4-Way Carriage Stop, 4-Way Tool Post, Coolant System, Follow Rest, Halogen Light, Rapid Transverse on Longitudinal, Steady Rest, Tailstock, Tool Kit |
| Features | Camlock Spindle, Direct Selection for Inch/Metric Threads, One Piece Cast Meehanite Bed, Quick Change Gearbox |
| Hz | 60 |
| Gap Length (In.) | 14-1/2 |
| Swing In Gap (In.) | 31 |
| Distance Between Centers (In.) | 40 |
| Number of Spindle Speeds | 12 |
| Overall Length | 100 in |
| Bed Width (In.) | 15-3/4 |
| Thread Range (In.) | 2 to 56 |
| Swing Over Cross Slide (In.) | 13-3/16 |
| Thread Range (mm) | 2 to 56 |
| Tailstock Taper | MT9 |
| Cross Feed Rates | 0.001 to 0.094 |
| Tailstock Travel (In.) | 6-1/2 |
| Cross Travel (In.) | 14-3/4 |
| Number of Threads (In.) | 44 |
| Longitudinal Feed Rates | 0.002 to 0.032 |
| Spindle Taper | MT-5 |
| Overall Width | 40 1/2 in |
| Compound Travel (In.) | 7-3/4 |
| Number of Threads (mm) | 40 |
| Carriage Travel (In.) | 40 |
| Spindle Speed (RPM) | 10 to 1000 |
| Spindle Bore | 4 47/64 in |
| Swing In Gap | 31 in |
| Min. Threads per Inch | 2 |
| Min. Metric Thread | 0.5 mm (Module), 4 mm (D.P) |
| Min. Cross Feed | 0.0010 in |
| Gap Length | 14 1/2 in |
| Number of Inch Threads | 44 |
| Max. Cross Feed | 0.0094 in |
| Swing Over Cross Slide | 13 3/16 in |
| Application | Metal Turning |
| Max. Threads per Inch | 56 |
| Number of Metric Threads | 40 |
| Bed Width | 15 3/4 in |
| Max. Spindle Speed | 1,000 RPM |
| Min. Spindle Speed | 10 RPM |
| Swing Over Bed | 22 in |
| Max. Metric Thread | 14 mm (Module), 56 mm (D.P) |
| Spindle Nose Type | D1-11 Camlock |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 1 |
Lathe, 220V AC Volts, 15 hp HP, 60 Hz, Three Phase 40 in Distance Between Centers, Sharp, Mfr#: 2240B
$56622.99
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 40 in, Voltage 220V AC, Horsepower 15 hp, Min. Spindle Speed 10 RPM, Application Metal Turning, Overall Height 50 in, Overall Length 100 in, Overall Width 40 1/2 in, Max. Spindle Speed 1,000 RPM, Tailstock Taper MT9, Spindle Nose Type D1-11 Camlock
9999 in stock
Subtotal:
$56622.99
You must be logged in to post a review.
Reviews
There are no reviews yet.