| Item | Lathe |
| Overall Length | 97 in |
| Compound Travel (In.) | 5-1/8 |
| Gap Length (In.) | 12-1/4 |
| Cross Travel (In.) | 9 |
| Overall Height | 97 in |
| Overall Width | 45 in |
| Phase | Three |
| Swing Over Cross Slide (In.) | 7-5/8 |
| Bed Width (In.) | 13-3/8 |
| Number of Threads (mm) | 24 |
| Cross Feed Rates | 122 |
| Longitudinal Feed Rates | 122 |
| Carriage Travel (In.) | 35 |
| Spindle Taper | MT-7 |
| Spindle Speed (RPM) | 42 to 1800 |
| Motor HP | 7-1/2 |
| Swing In Gap (In.) | 23-5/8 |
| Spindle Bore (In.) | 3-1/8 |
| Number of Spindle Speeds | 12 |
| Swing Over Bed (In.) | 14 |
| Features | 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings |
| Includes | (5) 12 in Faceplates, 10 in 3 Jaw Scroll Chuck with Top Reversing Jaws, Acu-Rite 300S DRO, Articulating LED Work Lamp, Centrally Located Controls with Jog Button, E-Stop on Carriage, Electronic Chuck Key Holder, Fitted Top Mats to Hold Tooling, Follow Rest, Foot Brake, Full Length Splash Guard and Coolant Return, Fully Integrated Coolant System, Large Capacity Steady Rest with Ball Bearing Tips, Live Center, Mounting Pads and Levelers, Quick Change Tool Post Set, Threading Dial, Tolerance Test Certificate, Tool Box and Adjusting Tools |
| Thread Range (In.) | 1-5/8 to 72 |
| Thread Range (mm) | .05 to 20 |
| Voltage | 230V AC |
| Distance Between Centers (In.) | 40 |
| Tailstock Taper | MT3 |
| Tailstock Travel (In.) | 5 |
| Number of Threads (In.) | 61 |
| Application | Turning |
| Max. Metric Thread | 20 mm |
| Swing In Gap | 23 5/8 in |
| Swing Over Bed | 14 in |
| Swing Over Cross Slide | 7 5/8 in |
| Max. Spindle Speed | 1,800 RPM |
| Number of Metric Threads | 24 |
| Min. Cross Feed | 0.0006 in |
| Number of Inch Threads | 61 |
| Bed Width | 9 3/8 in |
| Gap Length | 12 1/4 in |
| Spindle Nose Type | D1-4 Camlock |
| Min. Metric Thread | 0.05 mm |
| Min. Spindle Speed | 42 RPM |
| Spindle Bore | 3 1/8 in |
| Max. Threads per Inch | 72 |
| Max. Cross Feed | 0.0360 in |
| Min. Threads per Inch | 1 5/8 |
| Horsepower | 7 1/2 hp |
| Distance Between Centers | 40 in |
| Sound Level | 88 dB |
| Frequency | 60 Hz |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Lrg Spdl Bore Lathe, 7-1/2HP, 3P, JET, Mfr# 321910
$25949,00
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 40 in, Voltage 230V AC, Horsepower 7 1/2 hp, Min. Spindle Speed 42 RPM, Application Turning, Overall Height 97 in, Overall Length 97 in, Overall Width 45 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.