| Property | Value |
|---|---|
| Item | Retaining Compound |
| Shear Strength (PSI) | 2,300 psi |
| Optimal Usage Temperature | -65 Degrees to 300 Degrees F |
| Color | Green |
| Compatible Materials | Steel |
| Gap Fill Size - Retaining Compounds | 0.006 in |
| Container Type - Adhesives | Bottle |
| Application | Press Fit, Press Fit or Slip Fit/Housing Mount, Shaft Mount |
| Container Size | 0.34 fl oz |
| Container Size - Adhesives | 0.34 oz |
| Operating Temperature Range | -65 Degrees F to 300 Degrees F |
| Maximum Gap Fill Size | 0.006 in |
| Shear Strength | 2,290 psi |
| Standards | 29 CFR 1910.1200 |
| Size | 10ml |
| Primer | T |
| Characteristics | Green |
| Compound Type | Fast Cure, General Purpose Low Viscosity |
| Type | General Purpose |
| Physical Form | Liquid |
| Max. Temp. (F) | 300 Degrees F |
| Series | 609 |
| Full Cure | 24 hr |
| Gap Fill Size | 0.006 in |
| Container Type | Bottle |
| Compatible Primer Series | Excel 612 |
| Storage Requirements | 8 Degrees to 21 Degrees C |
| Minimum Viscosity | 120 cps |
| Retaining Compounds Properties | For Close Fitting Parts |
| Specific Gravity | 1.1 |
| Cure Type | Anaerobic |
| Minimum Operating Temperature | -65 Degrees F |
| Maximum Viscosity | 120 cps |
| For Material Type | Steel |
| Working Time | 10 min |
| Chemical Base | Methacrylate Ester |
| Maximum Operating Temperature | 300 Degrees F |
| Primer Required | Yes |
| Clean Up Method | Solvent, Wire Brush |
| Product Form | Liquid |
| VOC Content | 2.46 g/L |
| Full Cure Time | 1 day |
| Flash Point | 200 Degrees F |
| Retaining Compound Strength | High |
| Non-Toxic | No |
| Filling Gap Size | Up to 0.006 |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Retaining Compound 609, .34 fl oz, 10 ml, Bottle, Green, Loctite, Mfr#: 135511
$18.29
Free shipping will be applied on orders over $50
Retaining Compound, For Material Type Steel, Retaining Compounds Properties For Close Fitting Parts, Series 609, Container Size 0.3 fl oz, Container Type Bottle, Maximum Gap Fill Size 0.006 in, Working Time 10 min, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature -65 Degrees F, Color Green, Full Cure Time 1 day, Shear Strength 2,290 psi, Standards 29 CFR 1910.1200, Primer Required Yes, Chemical Base Methacrylate Ester, Clean Up Method Solvent, Wire Brush
9999 in stock
Subtotal:
$18.29
You must be logged in to post a review.
Reviews
There are no reviews yet.