| Item | Lathe |
| Spindle Bore (In.) | 3-1/8 |
| Features | 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings |
| Overall Length | 136 in |
| Overall Width | 45 in |
| Tailstock Taper | MT3 |
| Phase | Three |
| Thread Range (mm) | .05 to 20 |
| Cross Travel (In.) | 12 |
| Distance Between Centers (In.) | 80 |
| Includes | (5) 12 in Faceplates, 10 in 3 Jaw Scroll Chuck with Top Reversing Jaws, Acu-Rite 300S DRO, Articulating LED Work Lamp, Centrally Located Controls with Jog Button, E-Stop on Carriage, Electronic Chuck Key Holder, Fitted Top Mats to Hold Tooling, Follow Rest, Foot Brake, Full Length Splash Guard and Coolant Return, Fully Integrated Coolant System, Large Capacity Steady Rest with Ball Bearing Tips, Live Center, Mounting Pads and Levelers, Quick Change Tool Post Set, Threading Dial, Tolerance Test Certificate, Tool Box and Adjusting Tools |
| Number of Threads (In.) | 61 |
| Spindle Speed (RPM) | 25 to 1800 |
| Carriage Travel (In.) | 74-5/16 |
| Swing Over Cross Slide (In.) | 13 |
| Number of Threads (mm) | 24 |
| Tailstock Travel (In.) | 5 |
| Voltage | 230/460V AC |
| Longitudinal Feed Rates | 122 |
| Cross Feed Rates | 122 |
| Overall Height | 136 in |
| Thread Range (In.) | 1-5/8 to 72 |
| Spindle Taper | MT-7 |
| Gap Length (In.) | 12 |
| Swing Over Bed (In.) | 22 |
| Motor HP | 10 |
| Compound Travel (In.) | 5-1/8 |
| Swing In Gap (In.) | 29-1/2 |
| Number of Spindle Speeds | 12 |
| Application | Turning |
| Spindle Bore | 3 1/8 in |
| Max. Threads per Inch | 72 |
| Min. Metric Thread | 0.05 mm |
| Swing Over Bed | 22 in |
| Min. Spindle Speed | 25 RPM |
| Distance Between Centers | 80 in |
| Swing Over Cross Slide | 13 in |
| Max. Cross Feed | 0.0360 in |
| Bed Width | 9 1/2 in |
| Max. Metric Thread | 20 mm |
| Spindle Nose Type | D1-4 Camlock |
| Min. Threads per Inch | 1 5/8 |
| Min. Cross Feed | 0.0006 in |
| Number of Metric Threads | 24 |
| Swing In Gap | 29 1/2 in |
| Horsepower | 10 hp |
| Max. Spindle Speed | 1,800 RPM |
| Number of Inch Threads | 61 |
| Gap Length | 12 in |
| Frequency | 60 Hz |
| Sound Level | 88 dB |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Lrg Spdl Bore Lathe, 10HP, 3P, 80 Center In, JET, Mfr# 321980
$33549,00
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 80 in, Voltage 230/460V AC, Horsepower 10 hp, Min. Spindle Speed 25 RPM, Application Turning, Overall Height 136 in, Overall Length 136 in, Overall Width 45 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.