| Item | Plasma Cutter |
| Rated Output | 12 A |
| Input Voltage | 120V |
| Cutting Capacity (In.) | 1/4 in |
| Cable Length (Ft.) | 12 |
| Series | AirForce 12ci |
| Input (Amps) | 20A |
| Overall Width (In.) | 8 1/4 in |
| Design | Inverter |
| Overall Height (In.) | 10 in |
| Duty Cycle | 35 % |
| Overall Depth (In.) | 13 in |
| Application | Mild Steel, Sheet Metal |
| OCV | 375V DC |
| Includes | Built-in Air Compressor, Extra Consumables, Power Cord with Plug, Work Cable with Clamp, XT12R Hand-Held Torch |
| Plasma Torch Type | Handheld |
| Standards | CSA |
| For Maximum Material Thickness | 1/4 in |
| Rated Output at Duty Cycle | 12 A @ 35% |
| Color | White |
| Weight | 25.1 lb |
| Plasma Cutter Model | 500564 |
| Features | Diagnostic Lights, Inverter Design, Pilot Arc Start, Postflow Cooling Circuit, Thermal Overload Protection |
| Max. Amperage Range | Less than 50 A |
| Open Circuit Voltage | 375 V DC |
| Effective Input Current | 20 A @ 120V (Single-Phase) |
| Plasma Cutter Type | Plasma Cutter with Built-In Air Compressor |
| Overall Width | 8.25 in |
| Power Cord Length | 7 ft |
| Plug Type | 5-15P |
| For Material Type | Mild Steel |
| Cutting Cable Length | 12 ft |
| Overall Depth | 13 in |
| Max. Input Current | 20 A @ 120V (Single-Phase) |
| Plasma Torch | 12 ft Handheld |
| Welding Processes | Plasma Cutting |
| For Minimum Material Thickness | 1/8 in |
| Cutting Configuration | Plasma Cutting |
| Plasma Cutting Minimum Output Current | 12 A |
| Plasma Cutting Output @ Duty Cycle | 12 A @ 100V DC, 35% |
| Ground Cord Length | 12 ft |
| Phase | Single-Phase |
| Input Frequency | 60 Hz |
| Overall Height | 10 in |
| Maximum Output Current | 12 A |
| Input Voltage (Nominal) | 120V |
| Process | Plasma Cutting |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Plasma Cutter, 20, 35 percent, AirForce12ci, HOBART WELDING PRODUCTS, Mfr# 500564
$1241,99
-$37.26 / ea
with subscription
Free shipping will be applied on orders over $50
Plasma Cutter, Cutting Configuration Plasma Cutting, Effective Input Current 20 A @ 120V (Single-Phase), For Material Type Mild Steel, For Maximum Material Thickness 1/4 in, For Minimum Material Thickness 1/8 in, Input Frequency 60 Hz, Input Voltage 120 V AC, Max. Input Current 20 A @ 120V (Single-Phase), Open Circuit Voltage 375 V DC, Phase Single-Phase, Plasma Cutter Model 500564, Maximum Output Current 12 A, Plasma Cutting Minimum Output Current 12 A
9999 in stock
Must order in multiples of 1
Subtotal:
$1241.99
You must be logged in to post a review.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.