Promotion Restriction | Not eligible for promotion |
Item | Metal Bender |
Type | Hydraulic |
Outside Dia. Tubing (In.) | 2 1/2 in |
Centerline Bend Radius | 3 in |
Bend Angle (Deg.) | 0 to 180 |
Handle Type | Knee Control |
Construction | Metal |
Calibration Increments (Deg.) | 0.5 Degrees |
Markings | Degrees |
Features | A Useful Tooling Tray is Standard as Well So the Tooling Stays with the Machine Instead of Getting Lost in a Busy Auto Shop, for Bending, the EB-300 Exhaust Bender Comes with Standard Radius Tooling from 1-1/2 in upto 3 in OD (For 2-1/4 to 3 in OD Tubing 12 Gauge Mild Steel Wall Thickness is Required), have an Automotive Repair Shop that is Constantly Outsourcing Your Exhaust Jobs Because You Don't have the Right Tube Bender for the Job. if that is the Case Look, at the EB-300 Exhaust Bender from Baileigh Industrial, the EB-300 Exhaust Pipe Bender is Considered a Compression Bender as it Uses One Large Hydraulic Ram to Push the Inside Radius Die into the Compression Assisted Outside Counter Dies, the EB-300 Exhaust Pipe Bender Requires 220 Volts of Single Phase Power is Operated Using Knee Controls, Allowing Hands to be Kept Free for Material Control, the EB-300 Exhaust Tube Bender Comes Filled with Hydraulic Fluid and has an Oil Sight Glass to Ensure the Proper Level is Maintained at All Times, the Outside Dies have Two Hydraulic Cylinders that Applies Pressure at the Point of Bend on the Inside Radius Die. the End Result is that the Machine can Bend Light Gauge Tubing without Folding the Material in Half, This Exhaust Tube Bender also Comes Equipped with Tube End Forming Station. This Station Includes Tooling to Expand, Flare and Swage the Tubing. it also Allows the Operator to Create Ball Joints and Flanges, This Just Might be Tool You Need to Add Profitability Back to Your Jobs. the EB-300 Exhaust Pipe Bender Comes with Everything You Need to Get Started |
Outside Dia. Tubing (mm) | 63.5 mm |
Application | For Tube Bending |
Material | Metal |
Bend Angle - Minimum | 0 Degrees |
Bend Angle - Maximum | 180 Degrees |
Centerline Bend Radius1 | 3 in |
Calibration Increments | 0.5 Degrees |
Tubing Outside Diameter | 2 1/2 in |
Power Source | Electric |
Bend Type Markings | Degrees |
Max. Bending Angle | 180 Degrees |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Metal Bender, Hydraulic, Metal, BAILEIGH INDUSTRIAL, Mfr# EB-300
$15769,00
Free shipping will be applied on orders over $50
Metal Bender, Bend Type Markings Degrees, Tubing Outside Diameter 2 1/2 in, Bend Angle - Minimum 0 Degrees , Bend Angle - Maximum 180 Degrees , Centerline Bend Radius 3 in, Application For Tube Bending, Calibration Increments 0.5 Degrees
9999 in stock
Must order in multiples of 1
Subtotal:
$15769
You must be logged in to post a review.
Reviews
There are no reviews yet.