Item
Motion Control Coupling
Shaft Locking Type - Couplings
1 Piece Clamp
System of Measurement
Metric
Material - Couplings
Stainless Steel
Length through Bore (mm)
17.02
Item - Motion Control Couplings
Motion Control Coupling
Clearance Dia. (In.)
1.125 in
Max. Parallel Misalignment (In.)
0.015 in
Length through Bore (In.)
0.67
Torsional Stiffness (Deg./In.-Lbs.)
0.044
Length through Bore
17.02 mm
Max. Temp. Range (F)
350 Degrees
Max. Angular Misalignment
3 Degrees
Max. Axial Misalignment (In.)
+/-0.01
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Bore Tolerance
+0.025/-0.000 mm
Screw Material
Alloy Steel
Coupling Material
Stainless Steel
Angular Misalignment
3 Degrees
Minimum Operating Temperature
-40 Degrees C
For Misalignment Type
Angular, Axial, Parallel
Length Through Bore 2
17.6 mm
Coupling Outside Diameter
31.8 mm
Parallel Misalignment
0.38 mm
Shaft Tolerance
+0.000/-0.013 mm
Screw Material Finish
Black Oxide
Torsional Stiffness
2.56 N-m/Deg
Number of Locking Screws
2
Coupling Material Grade
303
Shaft Locking Type
Clamp On
Maximum Operating Temperature
176 Degrees C
Included Screws
(2) Hex Socket Cap Screw
Fastener Tightening Torque
4.6 N-m
Dynamic Torque Non-Reversing
4.58 N-m
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Dynamic Torque Reversing
2.29 N-m
Full Bearing Support Required
Yes
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Length Through Bore 1
17.6 mm
Coupling Material Finish
Bright
Moment of Inertia
0.000026977 kgf/m sq
Country of Origin (subject to change)
United States