Item | Motion Control Coupling |
Shaft Locking Type - Couplings | 1 Piece Clamp |
System of Measurement | Metric |
Bore Dia. | 12mm x 9mm |
Material - Couplings | Aluminum |
Outside Dia. | 31.8 mm |
Overall Length | 44.5 mm |
Finish | Bright |
Length through Bore (mm) | 20.82 |
Min. Bore (mm) | 9 |
Screw Size (mm) | M5 |
Outside Dia. (mm) | 31.8 |
Item - Motion Control Couplings | Motion Control Coupling |
Overall Length (In.) | 1.75 |
Screw Type | Cap Screw |
Max. Parallel Misalignment (In.) | 0.01 in |
Screw Size | M5 |
Overall Length (mm) | 44.5 |
Rated Torque | 50 in-lb |
Length through Bore (In.) | 0.82 |
Max. Angular Misalignment | 3 Degrees |
Clearance Dia. (mm) | 37.06 |
Material | Aluminum |
Torque (In.-Lbs.) | 50 |
Outside Dia. (In.) | 1.25 |
Torsional Stiffness (Deg./In.-Lbs.) | 0.071 |
Max. Axial Misalignment (In.) | +/-0.015 |
Max. RPM | 6,000 RPM |
Style | 6-Beam Clamp |
Max. Bore (mm) | 12 mm |
Size | FCMR32 |
Length through Bore | 20.82 mm |
Clearance Dia. (In.) | 1.459 in |
Max. Temp. | 225 Degrees F |
Max. Temp. Range (F) | 225 Degrees |
Standards | Conflict Minerals Compliant, DIN 912 12.9, REACH Compliant, RoHS3 Compliant |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Screw Material | Alloy Steel with Nypatch |
Bore Tolerance | +0.025/-0.000 mm |
Different Bore Sizes | Yes |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
Minimum Bore Diameter | 9 mm |
Torsional Stiffness | 1.59 N-m/Deg |
Dynamic Torque Reversing | 1.41 N-m |
Included Screws | (2) Hex Socket Cap Screw |
Coupling Material | Aluminum |
Coupling Outside Diameter | 31.8 mm |
Coupling Material Grade | 7075 |
For Misalignment Type | Angular, Axial, Parallel |
Number of Locking Screws | 2 |
Dynamic Torque Non-Reversing | 2.83 N-m |
Minimum Operating Temperature | -40 Degrees C |
Parallel Misalignment | 0.38 mm |
Length Through Bore 1 | 21.4 mm |
Bore Diameter 1 | 12 mm |
Screw Thread Size | M5 |
Maximum Operating Temperature | 107 Degrees C |
Moment of Inertia | 0.000011885 kgf/m sq |
Angular Misalignment | 3 Degrees |
Maximum Speed | 6,000 RPM |
Shaft Tolerance | +0.000/-0.013 mm |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Bore Type | Round |
Axial Motion | 0.25 mm |
Fastener Tightening Torque | 9.5 N-m |
Series | FCMR |
Number of Beams | 6 |
Shaft Locking Type | Clamp On |
Bore Diameter 2 | 9 mm |
Zero Backlash | Yes |
Full Bearing Support Required | Yes |
Coupling Material Finish | Bright |
Length Through Bore 2 | 21.4 mm |
Maximum Torque | 5.65 N-m |
Screw Material Finish | Black Oxide |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 6 Beam Clamp, 12mmx9mm, RULAND, Mfr# FCMR32-12-9-A
$72,19
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 12 mm, Bore Diameter 2 9 mm, Coupling Material Aluminum, Coupling Outside Diameter 31.8 mm, Maximum Speed 6,000 RPM, Maximum Torque 5.65 N-m, Axial Motion 0.25 mm, Overall Length 44.5 mm, Parallel Misalignment 0.38 mm, System of Measurement Metric, Different Bore Sizes Yes, Torsional Stiffness 1.59 N-m/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 21.4 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$72.19
You must be logged in to post a review.
Reviews
There are no reviews yet.