Shaft Locking Type - Couplings | 1 Piece Clamp |
Item | Motion Control Coupling |
System of Measurement | Inch to Metric |
Bore Dia. | 1/2 in x 16mm |
Material - Couplings | Aluminum |
Outside Dia. | 1.5 in |
Overall Length | 2 1/4 in |
Finish | Bright |
Screw Type | Cap Screw |
Material | Aluminum |
Max. Axial Misalignment (In.) | +/-0.015 |
Length through Bore (In.) | 1.042 |
Outside Dia. (In.) | 1.5 |
Overall Length (mm) | 57.2 |
Clearance Dia. (mm) | 41.71 |
Min. Bore (In.) | 0.5 in |
Torsional Stiffness (Deg./In.-Lbs.) | 0.044 |
Rated Torque | 95 in-lb |
Size | FCR24 |
Screw Size | M5 |
Torque (In.-Lbs.) | 95 |
Max. RPM | 6,000 RPM |
Style | 6-Beam Clamp |
Min. Bore (mm) | 0.5 |
Max. Parallel Misalignment (In.) | 0.03 in |
Max. Temp. | 225 Degrees F |
Max. Temp. Range (F) | 225 Degrees |
Clearance Dia. (In.) | 1.642 in |
Outside Dia. (mm) | 38.1 |
Overall Length (In.) | 2.25 |
Max. Angular Misalignment | 3 Degrees |
Length through Bore (mm) | 26.47 |
Item - Motion Control Couplings | Motion Control Coupling |
Max. Bore (mm) | 16 mm |
Screw Size (mm) | M5 |
Length through Bore | 26.47 mm |
Standards | Conflict Minerals Compliant, DIN 912 12.9, REACH Compliant, RoHS3 Compliant |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Bore Tolerance | +0.001/-0.000 in |
Screw Material | Alloy Steel with Nypatch |
Full Bearing Support Required | Yes |
Dynamic Torque Non-Reversing | 47.5 lb-in |
Moment of Inertia | 0.1023 lb-in sq |
Bore Diameter 1 | 16 mm |
Number of Beams | 6 |
Torsional Stiffness | 22.73 in-lb/Deg |
Screw Thread Size | M5 |
For Misalignment Type | Angular, Axial, Parallel |
Bore Diameter 2 | 1/2 in |
Length Through Bore 1 | 1.1 in |
Angular Misalignment | 3 Degrees |
Minimum Operating Temperature | -40 Degrees F |
Length Through Bore 2 | 1.1 in |
Coupling Material | Aluminum |
Fastener Tightening Torque | 9.5 N-m |
Zero Backlash | Yes |
Maximum Speed | 6,000 RPM |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
Maximum Torque | 95 in-lb |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Included Screws | (2) Hex Socket Cap Screw |
Different Bore Sizes | Yes |
Screw Material Finish | Black Oxide |
Shaft Tolerance | +0.0000/-0.0005 in |
Number of Locking Screws | 2 |
Coupling Material Grade | 7075 |
Bore Type | Round |
Shaft Locking Type | Clamp On |
Dynamic Torque Reversing | 23.75 lb-in |
Coupling Material Finish | Bright |
Axial Motion | 0.015 in |
Parallel Misalignment | 0.03 in |
Series | FCR |
Coupling Outside Diameter | 1 1/2 in |
Maximum Operating Temperature | 225 Degrees F |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 6 Beam Clamp, 16mmx1/2in., RULAND, Mfr# FCR24-16MM-1/2""-A
$109,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 16 mm, Bore Diameter 2 1/2 in, Coupling Material Aluminum, Coupling Outside Diameter 1 1/2 in, Maximum Speed 6,000 RPM, Maximum Torque 95 in-lb, Axial Motion 0.015 in, Overall Length 2 1/4 in, Parallel Misalignment 0.03 in, System of Measurement Inch to Metric, Different Bore Sizes Yes, Torsional Stiffness 22.73 in-lb/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 1.1 in
9999 in stock
Must order in multiples of 1
Subtotal:
$109.99
You must be logged in to post a review.
Reviews
There are no reviews yet.