Shaft Locking Type - Couplings | 1 Piece Clamp |
Bore Dia. | 1/2 in x 1/2 in |
Rated Torque | 50 in-lb |
Max. RPM | 6,000 RPM |
Outside Dia. | 1.25 in |
Overall Length | 1 3/4 in |
Material - Couplings | Aluminum |
Max. Parallel Misalignment (In.) | 0.015 in |
Outside Dia. (In.) | 1.250 |
Finish | Bright |
Max. Temp. | 225 Degrees F |
Overall Length (In.) | 1.75 |
Max. Axial Misalignment (In.) | +/-0.010 |
Length through Bore (In.) | 0.875 |
Clearance Dia. (In.) | 1.459 in |
Torsional Stiffness (Deg./In.-Lbs.) | 0.072 |
Length through Bore | 0.875 in |
Max. Angular Misalignment | 3 Degrees |
Item - Motion Control Couplings | Motion Control Coupling |
Item | Motion Control Coupling |
Screw Size | M5 |
Torque (In.-Lbs.) | 50 |
Screw Type | Cap Screw |
Max. Temp. Range (F) | 225 |
Screw Size (mm) | M5 |
Material | Aluminum |
Style | 6 Beam Clamp |
Dynamic Torque Reversing | 12.5 lb-in |
Screw Material | Alloy Steel with Nypatch |
Axial Motion | 0.01 in |
Moment of Inertia | 0.0401 lb-in sq |
Dynamic Torque Non-Reversing | 25 lb-in |
Bore Tolerance | +0.001/-0.000 in |
Coupling Material Finish | Bright |
Included Screws | (2) Hex Socket Cap Screw |
Maximum Speed | 6,000 RPM |
Number of Beams | 6 |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
Parallel Misalignment | 0.015 in |
Bore Diameter 1 | 1/2 in |
Full Bearing Support Required | Yes |
Length Through Bore 1 | 0.8 in |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Maximum Torque | 50 in-lb |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Fastener Tightening Torque | 9.5 N-m |
Shaft Tolerance | +0.0000/-0.0005 in |
Screw Material Finish | Black Oxide |
System of Measurement | Inch |
Maximum Operating Temperature | 225 Degrees F |
Torsional Stiffness | 13.89 in-lb/Deg |
Series | FCR |
Screw Thread Size | M5 |
Zero Backlash | Yes |
Coupling Material | Aluminum |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Bore Diameter 2 | 1/2 in |
Coupling Outside Diameter | 1 1/4 in |
Minimum Operating Temperature | -40 Degrees F |
Bore Type | Round |
Different Bore Sizes | No |
For Misalignment Type | Angular, Axial, Parallel |
Coupling Material Grade | 7075 |
Number of Locking Screws | 2 |
Shaft Locking Type | Clamp On |
Length Through Bore 2 | 0.8 in |
Angular Misalignment | 3 Degrees |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 6 Beam Clamp, Bore 1/2 x 1/2 In, RULAND, Mfr# FCR20-8-8-A
$96,55
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 1/2 in, Bore Diameter 2 1/2 in, Coupling Material Aluminum, Coupling Outside Diameter 1 1/4 in, Maximum Speed 6,000 RPM, Maximum Torque 50 in-lb, Axial Motion 0.01 in, Overall Length 1 3/4 in, Parallel Misalignment 0.015 in, System of Measurement Inch, Different Bore Sizes No, Torsional Stiffness 13.89 in-lb/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 0.8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$96.55
You must be logged in to post a review.
Reviews
There are no reviews yet.