Shaft Locking Type - Couplings | 1 Piece Clamp |
Item | Motion Control Coupling |
System of Measurement | Inch |
Bore Dia. | 1/8 in x 1/8 in |
Material - Couplings | Aluminum |
Outside Dia. | 0.75 in |
Overall Length | 29/32 in |
Finish | Bright |
Material | Aluminum |
Torsional Stiffness (Deg./In.-Lbs.) | 0.18 |
Style | 4-Beam Clamp |
Size | PCR12 |
Length through Bore (In.) | 0.386 |
Clearance Dia. (mm) | 31.8 |
Rated Torque | 26 in-lb |
Overall Length (mm) | 22.9 |
Length through Bore | 0.386 in |
Max. Bore (In.) | 0.125 in |
Max. Parallel Misalignment (In.) | 0.008 in |
Overall Length (In.) | 0.9 |
Length through Bore (mm) | 9.8 |
Item - Motion Control Couplings | Motion Control Coupling |
Clearance Dia. (In.) | 1.25 in |
Max. RPM | 6,000 RPM |
Max. Axial Misalignment (In.) | +/-0.005 |
Torque (In.-Lbs.) | 26 |
Screw Size (mm) | M2.5 |
Max. Temp. Range (F) | 225 Degrees |
Outside Dia. (mm) | 19.1 |
Outside Dia. (In.) | 0.750 in |
Min. Bore (In.) | 0.125 in |
Screw Size | M2.5 |
Max. Angular Misalignment | 3 Degrees |
Max. Temp. | 225 Degrees F |
Screw Type | Cap Screw |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Bore Tolerance | +0.001/-0.000 in |
Screw Material | Alloy Steel |
Different Bore Sizes | No |
Coupling Material Grade | 7075 |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
Parallel Misalignment | 0.008 in |
Series | PCR |
For Misalignment Type | Angular, Axial, Parallel |
Length Through Bore 1 | 0.4 in |
Maximum Torque | 26 in-lb |
Angular Misalignment | 3 Degrees |
Axial Motion | 0.005 in |
Bore Diameter 2 | 1/8 in |
Screw Material Finish | Black Oxide |
Maximum Operating Temperature | 225 Degrees F |
Bore Type | Round |
Number of Beams | 4 |
Dynamic Torque Reversing | 6.5 lb-in |
Included Screws | (2) Hex Socket Cap Screw |
Minimum Operating Temperature | -40 Degrees F |
Length Through Bore 2 | 0.4 in |
Bore Diameter 1 | 1/8 in |
Screw Thread Size | M2.5 |
Shaft Locking Type | Clamp On |
Fastener Tightening Torque | 1.21 N-m |
Full Bearing Support Required | Yes |
Shaft Tolerance | +0.0000/-0.0005 in |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Coupling Material Finish | Bright |
Maximum Speed | 6,000 RPM |
Zero Backlash | Yes |
Coupling Outside Diameter | 3/4 in |
Dynamic Torque Non-Reversing | 13 lb-in |
Torsional Stiffness | 5.56 in-lb/Deg |
Moment of Inertia | 0.0025 lb-in sq |
Coupling Material | Aluminum |
Number of Locking Screws | 2 |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 4 Beam Clamp, 1/8in.x 1/8in., RULAND, Mfr# PCR12-2-2-A
$39,25
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 1/8 in, Bore Diameter 2 1/8 in, Coupling Material Aluminum, Coupling Outside Diameter 3/4 in, Maximum Speed 6,000 RPM, Maximum Torque 26 in-lb, Axial Motion 0.005 in, Overall Length 29/32 in, Parallel Misalignment 0.008 in, System of Measurement Inch, Different Bore Sizes No, Torsional Stiffness 5.56 in-lb/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 4, Length Through Bore 2 0.4 in
9999 in stock
Must order in multiples of 1
Subtotal:
$39.25
You must be logged in to post a review.
Reviews
There are no reviews yet.