Shaft Locking Type - Couplings | 1 Piece Clamp |
Bore Dia. | 3/4 in x 3/4 in |
Rated Torque | 80 in-lb |
Max. RPM | 6,000 RPM |
Outside Dia. | 1.5 in |
Overall Length | 2 1/4 in |
Material - Couplings | Aluminum |
Outside Dia. (In.) | 1.500 |
Screw Type | Cap Screw |
Clearance Dia. (In.) | 1.642 in |
Item | Motion Control Coupling |
Length through Bore (In.) | 1.125 |
Max. Temp. Range (F) | 225 |
Torsional Stiffness (Deg./In.-Lbs.) | 0.063 |
Screw Size | M5 |
Screw Size (mm) | M5 |
Max. Parallel Misalignment (In.) | 0.03 in |
Max. Angular Misalignment | 3 Degrees |
Finish | Bright |
Style | 6 Beam Clamp |
Torque (In.-Lbs.) | 80 |
Material | Aluminum |
Max. Temp. | 225 Degrees F |
Overall Length (In.) | 2.25 |
Item - Motion Control Couplings | Motion Control Coupling |
Length through Bore | 1.125 in |
Max. Axial Misalignment (In.) | +/-0.015 |
Dynamic Torque Non-Reversing | 40 lb-in |
Moment of Inertia | 0.1023 lb-in sq |
Bore Tolerance | +0.001/-0.000 in |
Screw Material | Alloy Steel with Nypatch |
Dynamic Torque Reversing | 20 lb-in |
Axial Motion | 0.015 in |
Fastener Tightening Torque | 9.5 N-m |
Torsional Stiffness | 15.87 in-lb/Deg |
Number of Locking Screws | 2 |
Different Bore Sizes | No |
Series | FCR |
System of Measurement | Inch |
Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
Bore Diameter 2 | 3/4 in |
Full Bearing Support Required | Yes |
Maximum Operating Temperature | 225 Degrees F |
Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
Number of Beams | 6 |
Shaft Tolerance | +0.0000/-0.0005 in |
Coupling Outside Diameter | 1 1/2 in |
Screw Material Finish | Black Oxide |
Screw Thread Size | M5 |
For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
Maximum Speed | 6,000 RPM |
Minimum Operating Temperature | -40 Degrees F |
Bore Type | Round |
Coupling Material Grade | 7075 |
Shaft Locking Type | Clamp On |
Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
Length Through Bore 2 | 1.1 in |
Coupling Material | Aluminum |
Coupling Material Finish | Bright |
Parallel Misalignment | 0.03 in |
Angular Misalignment | 3 Degrees |
Maximum Torque | 80 in-lb |
Bore Diameter 1 | 3/4 in |
Zero Backlash | Yes |
Included Screws | (2) Hex Socket Cap Screw |
Length Through Bore 1 | 1.1 in |
For Misalignment Type | Angular, Axial, Parallel |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, 6 Beam Clamp, Bore 3/4 x 3/4 In, RULAND, Mfr# FCR24-12-12-A
$97,99
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 3/4 in, Bore Diameter 2 3/4 in, Coupling Material Aluminum, Coupling Outside Diameter 1 1/2 in, Maximum Speed 6,000 RPM, Maximum Torque 80 in-lb, Axial Motion 0.015 in, Overall Length 2 1/4 in, Parallel Misalignment 0.03 in, System of Measurement Inch, Different Bore Sizes No, Torsional Stiffness 15.87 in-lb/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 1.1 in
9999 in stock
Must order in multiples of 1
Subtotal:
$97.99
You must be logged in to post a review.
Reviews
There are no reviews yet.