| Shaft Locking Type - Couplings | 1 Piece Clamp |
| Bore Dia. | 5/8 in x 5/8 in |
| Rated Torque | 175 in-lb |
| Max. RPM | 6,000 RPM |
| Outside Dia. | 1.5 in |
| Overall Length | 2 1/4 in |
| Material - Couplings | Stainless Steel |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.031 |
| Style | 6 Beam Clamp |
| Length through Bore | 1.125 in |
| Torque (In.-Lbs.) | 175 |
| Outside Dia. (In.) | 1.500 |
| Max. Angular Misalignment | 3 Degrees |
| Length through Bore (In.) | 1.125 |
| Overall Length (In.) | 2.25 |
| Item - Motion Control Couplings | Motion Control Coupling |
| Screw Size (mm) | M6 |
| Clearance Dia. (In.) | 1.642 in |
| Max. Axial Misalignment (In.) | +/-0.015 |
| Item | Motion Control Coupling |
| Finish | Bright |
| Material | Stainless Steel |
| Screw Type | Cap Screw |
| Screw Size | M6 |
| Max. Parallel Misalignment (In.) | 0.03 in |
| Max. Temp. | 350 Degrees F |
| Max. Temp. Range (F) | 350 |
| Axial Motion | 0.015 in |
| Moment of Inertia | 0.2814 lb-in sq |
| Bore Tolerance | +0.001/-0.000 in |
| Dynamic Torque Non-Reversing | 87.5 lb-in |
| Dynamic Torque Reversing | 43.75 lb-in |
| Screw Material | Alloy Steel with Nypatch |
| Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
| Number of Locking Screws | 2 |
| Screw Thread Size | M6 |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
| Maximum Torque | 175 in-lb |
| Coupling Material Finish | Bright |
| Fastener Tightening Torque | 16 N-m |
| For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
| For Misalignment Type | Angular, Axial, Parallel |
| Minimum Operating Temperature | -40 Degrees F |
| Coupling Material Grade | 303 |
| Full Bearing Support Required | Yes |
| Screw Material Finish | Black Oxide |
| Series | FCR |
| Bore Diameter 2 | 5/8 in |
| Bore Diameter 1 | 5/8 in |
| Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
| Parallel Misalignment | 0.03 in |
| Zero Backlash | Yes |
| Maximum Speed | 6,000 RPM |
| Length Through Bore 2 | 1.1 in |
| Maximum Operating Temperature | 350 Degrees F |
| Coupling Material | Stainless Steel |
| Length Through Bore 1 | 1.1 in |
| Coupling Outside Diameter | 1 1/2 in |
| System of Measurement | Inch |
| Included Screws | (2) Hex Socket Cap Screw |
| Number of Beams | 6 |
| Shaft Locking Type | Clamp On |
| Different Bore Sizes | No |
| Bore Type | Round |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Angular Misalignment | 3 Degrees |
| Torsional Stiffness | 32.26 in-lb/Deg |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Coupling, 6 Beam Clamp, Bore 5/8 x 5/8 In, RULAND, Mfr# FCR24-10-10-SS
$318,99
-$22.18 / ea
with subscription
Free shipping will be applied on orders over $50
Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 5/8 in, Bore Diameter 2 5/8 in, Coupling Material Stainless Steel, Coupling Outside Diameter 1 1/2 in, Maximum Speed 6,000 RPM, Maximum Torque 175 in-lb, Axial Motion 0.015 in, Overall Length 2 1/4 in, Parallel Misalignment 0.03 in, System of Measurement Inch, Different Bore Sizes No, Torsional Stiffness 32.26 in-lb/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 1.1 in
9999 in stock
Must order in multiples of 1
Subtotal:
$318.99
You must be logged in to post a review.
Reviews
There are no reviews yet.