Shaft Locking Type - Couplings
1 Piece Clamp
Item
Motion Control Coupling
System of Measurement
Metric
Material - Couplings
Aluminum
Length through Bore
15.06 mm
Item - Motion Control Couplings
Motion Control Coupling
Max. Parallel Misalignment (In.)
0.008 in
Length through Bore (In.)
0.593
Length through Bore (mm)
15.06
Torsional Stiffness (Deg./In.-Lbs.)
0.15
Clearance Dia. (In.)
0.879 in
Max. Axial Misalignment (In.)
+/-0.005
Max. Temp. Range (F)
225 Degrees
Max. Angular Misalignment
3 Degrees
Application
Servo Motors to Lead Screws
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Screw Material
Alloy Steel with Nypatch
Bore Tolerance
+0.025/-0.000 mm
Torsional Stiffness
0.75 N-m/Deg
For Misalignment Type
Angular, Axial, Parallel
Dynamic Torque Non-Reversing
1.47 N-m
Screw Material Finish
Black Oxide
Maximum Operating Temperature
107 Degrees C
Full Bearing Support Required
Yes
Parallel Misalignment
0.2 mm
Moment of Inertia
0.000001037 kgf/m sq
Fastener Tightening Torque
2.1 N-m
Length Through Bore 1
15.4 mm
Coupling Material
Aluminum
Shaft Tolerance
+0.000/-0.013 mm
Included Screws
(2) Hex Socket Cap Screw
Number of Locking Screws
2
Angular Misalignment
3 Degrees
Coupling Material Grade
7075
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash
Coupling Outside Diameter
19.1 mm
Minimum Operating Temperature
-40 Degrees C
Shaft Locking Type
Clamp On
Dynamic Torque Reversing
0.74 N-m
Coupling Material Finish
Bright
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Length Through Bore 2
15.4 mm
Country of Origin (subject to change)
United States
