Shaft Locking Type - Couplings
1 Piece Set Screw
Material - Couplings
Aluminum
Max. Angular Misalignment
3 Degrees
Max. Axial Misalignment (In.)
+/-0.010
Item
Motion Control Coupling
Item - Motion Control Couplings
Motion Control Coupling
Torsional Stiffness (Deg./In.-Lbs.)
0.14
Max. Parallel Misalignment (In.)
0.015 in
Length through Bore (mm)
19.05
Length through Bore (In.)
0.750
Length through Bore
19.05 mm
Screw Material
Alloy Steel
Dynamic Torque Non-Reversing
1.92 N-m
Bore Tolerance
+0.025/-0.000 mm
Dynamic Torque Reversing
0.96 N-m
Moment of Inertia
0.000006349 kgf/m sq
Shaft Tolerance
+0.000/-0.013 mm
Included Screws
(4) Set Screw
For Misalignment Type
Angular, Axial, Parallel
Screw Material Finish
Black Oxide
Maximum Operating Temperature
107 Degrees C
Length Through Bore 1
17.6 mm
Coupling Outside Diameter
28.6 mm
Features
Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash
Full Bearing Support Required
Yes
Number of Locking Screws
4
Parallel Misalignment
0.38 mm
Fastener Tightening Torque
4 N-m
Shaft Locking Type
Set Screw
Coupling Material Finish
Bright
Standards
Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant
Length Through Bore 2
17.6 mm
For Environment
Angular Misalignment, Axial Motion, Parallel Misalignment
Coupling Material
Aluminum
Torsional Stiffness
0.51 N-m/Deg
System of Measurement
Metric
Angular Misalignment
3 Degrees
Application
Light-Duty Power Transmission, Servo Motors to Lead Screws
Minimum Operating Temperature
-40 Degrees C
Coupling Material Grade
7075
Country of Origin (subject to change)
United States
