Item | Close Coupled Pump |
Motor Design | 3-Phase |
Motor Enclosure Design | Open Dripproof |
HP | 10 |
Nameplate RPM | 3,507/2,865 |
Frame | 213JM |
Voltage | 190V AC, 208V AC, 230V AC, 380V AC, 460V AC |
Motor Frame Material | Rolled Steel |
Motor Service Factor | 1.15 |
Nominal Efficiency | 89.5 % |
Ins. Class | F |
Hz | 60/50 |
Motor Application | Damp, Dusty or Dirty Environments, Specific Requirements of Centrifugal Pumps where the Pump Impeller is Mounted Directly on the Motor Shaft |
Motor Bearings | Ball |
Length Less Shaft | 13 1/2 in |
Overall Length | 20 13/16 in |
Shaft Dia. | 7/8 in |
Shaft Length | 7 1/4 in |
Motor Mounting Type | Horizontal Footless |
Motor Mounting Position | Horizontal |
Phase | Three |
Full Load Amps | 24.1/12.0 |
Regreasable Bearings | Regreasable Bearings |
Bolt Circle Dia. | 7 1/4 in |
No. of Speeds | 1 |
NEMA Design | B |
Max. SF Amps | 28.0/14.0 |
Body Dia. | 9.4 in |
Motor Shaft Design | Keyed |
Max. Ambient Temp. | 40 Degrees C |
Part Winding Start Capable | No |
Height | 11 3/16 in |
Duty Cycle | Continuous |
Weight | 90 lb |
Bearing Protection | Shaft Shields |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Motor, 3PH, 10HP, 3600,208-230/460V, JM FTL, U.S. MOTORS, Mfr# DJ10P1DU
$1124,99
Free shipping will be applied on orders over $50
Close Coupled Pump, Bearing Protection Shaft Shields, Body Dia. 9.4 in, Bolt Circle Dia. 7 1/4 in, Duty Cycle Continuous, Frame 213JM, Hz 60/50, Full Load Amps 24.1/12.0, Height 11 3/16 in, HP 10, Ins. Class F, Length Less Shaft 13 1/2 in, Max. Ambient Temp. 40 Degrees C, Max. SF Amps 28.0/14.0, Motor Application Damp, Dusty or Dirty Environments, Specific Requirements of Centrifugal Pumps where the Pump Impeller is Mounted Directly on the Motor Shaft, Motor Bearings Ball, Motor Design 3-Phase
0 in stock
Must order in multiples of 1
Subtotal:
$1124.99
You must be logged in to post a review.
Reviews
There are no reviews yet.