Item | Close Coupled Pump |
Motor Design | 3-Phase |
Motor Enclosure Design | Open Dripproof |
HP | 10 |
Nameplate RPM | 3,514 |
Frame | 213JM |
Voltage | 575V AC |
Length Less Shaft | 13 1/2 in |
Shaft Length | 7 1/4 in |
Hz | 60 Hz |
Motor Bearings | Ball |
Ins. Class | F |
Motor Mounting Position | Horizontal |
Overall Length | 20 13/16 in |
Phase | Three |
Motor Service Factor | 1.15 |
Nominal Efficiency | 89.5 % |
Full Load Amps | 9.7 |
Motor Mounting Type | Horizontal Footed |
Motor Application | Damp, Dusty or Dirty Environments, Specific Requirements of Centrifugal Pumps where the Pump Impeller is Mounted Directly on the Motor Shaft |
Motor Frame Material | Rolled Steel |
Shaft Dia. | 7/8 in |
NEMA Design | B |
Bolt Circle Dia. | 7 1/4 in |
Max. SF Amps | 11.2 |
Part Winding Start Capable | No |
Regreasable Bearings | Regreasable Bearings |
Height | 11 3/16 in |
Bearing Protection | Shaft Shields |
Conduit Box Position | F1 |
Body Dia. | 9.4 in |
No. of Speeds | 1 |
Duty Cycle | Continuous |
Motor Shaft Design | Keyed |
Max. Ambient Temp. | 40 Degrees C |
Weight | 90 lb |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Motor, 3PH, 10HP, 3600,575V, ODP JM, U.S. MOTORS, Mfr# DJ10P1GM
$935,99
Free shipping will be applied on orders over $50
Close Coupled Pump, Bearing Protection Shaft Shields, Body Dia. 9.4 in, Bolt Circle Dia. 7 1/4 in, Conduit Box Position F1, Duty Cycle Continuous, Frame 213JM, Hz 60 Hz, Full Load Amps 9.7, Height 11 3/16 in, HP 10, Ins. Class F, Length Less Shaft 13 1/2 in, Max. Ambient Temp. 40 Degrees C, Max. SF Amps 11.2, Motor Application Damp, Dusty or Dirty Environments, Specific Requirements of Centrifugal Pumps where the Pump Impeller is Mounted Directly on the Motor Shaft, Motor Bearings Ball
0 in stock
Must order in multiples of 1
Subtotal:
$935.99
You must be logged in to post a review.
Reviews
There are no reviews yet.