| Item | Close Coupled Pump |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Open Dripproof |
| HP | 15 |
| Nameplate RPM | 1,775 |
| Frame | 254JP |
| Voltage | 200V AC |
| Motor Frame Material | Rolled Steel |
| Ins. Class | F |
| Shaft Dia. | 1 1/4 in |
| Length Less Shaft | 13 in |
| Motor Mounting Type | Horizontal Footed |
| Full Load Amps | 42.0 |
| Motor Service Factor | 1.15 |
| Hz | 60 Hz |
| Phase | Three |
| Motor Application | Damp, Dusty or Dirty Environments, Specific Requirements of Centrifugal Pumps where the Pump Impeller is Mounted Directly on the Motor Shaft |
| Overall Length | 21 1/8 in |
| Motor Bearings | Ball |
| Motor Mounting Position | Horizontal |
| Nominal Efficiency | 93 % |
| Shaft Length | 8 1/8 in |
| No. of Speeds | 1 |
| Regreasable Bearings | Regreasable Bearings |
| Max. SF Amps | 48.0 |
| NEMA Design | B |
| Motor Shaft Design | Keyed |
| Max. Ambient Temp. | 40 Degrees C |
| Weight | 150 lb |
| Part Winding Start Capable | No |
| Height | 9 9/16 in |
| Conduit Box Position | F1 |
| Duty Cycle | Continuous |
| Body Dia. | 11.1 in |
| Bolt Circle Dia. | 7 1/4 in |
| Bearing Protection | Shaft Shields |
| Usable @ 200V | Yes |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Motor, 3PH, 15HP, 1800,200V, ODP JP, U.S. MOTORS, Mfr# DJ15P2HP
$1196,99
Free shipping will be applied on orders over $50
Close Coupled Pump, Bearing Protection Shaft Shields, Body Dia. 11.1 in, Bolt Circle Dia. 7 1/4 in, Conduit Box Position F1, Duty Cycle Continuous, Frame 254JP, Hz 60 Hz, Full Load Amps 42.0, Height 9 9/16 in, HP 15, Ins. Class F, Length Less Shaft 13 in, Max. Ambient Temp. 40 Degrees C, Max. SF Amps 48.0, Motor Application Damp, Dusty or Dirty Environments, Specific Requirements of Centrifugal Pumps where the Pump Impeller is Mounted Directly on the Motor Shaft, Motor Bearings Ball
0 in stock
Must order in multiples of 1
Subtotal:
$1196.99
You must be logged in to post a review.
Reviews
There are no reviews yet.