Item | Deep Well Submersible Pump Motor |
Phase | Single |
Dia. | 3 3/4 in |
HP | 1 |
Voltage | 230V AC |
Number of Wires | 2 |
RPM Range | 3,001-3,600 |
Motor Service Factor | 1.4 |
Motor Bearings | Sleeve |
Nameplate RPM | 3,450 |
Lead Length | 48 in |
Overload Relay Required | No |
Motor Enclosure Design | Totally Enclosed Nonventilated |
Hz | 60 Hz |
Motor Application | Pump |
Max. SF Amps | 10.4 |
Thrust Rating | 700 lb |
Motor Shaft Rotation | CWSE |
Shell Material | Stainless Steel |
Full Load Amps | 8.2 |
Standards | CSA (C22.2 No. 100-14), NSF/ANSI 61 |
Starter Required | No |
Motor Design | Split-Phase |
Motor Sub Application | Deep Well Submersible Pump |
Height | 12 1/8 in |
Diaphragm Type | Pressure Equalizing |
Max. Ambient Temp. | 86 Degrees F |
Stator Type | Hermetically Sealed |
Shaft Material | Stainless Steel |
Motor Thermal Protection | Auto |
Overload Relay Max. Amp Setting | Not Applicable |
Motor Mounting Position | Vertical Shaft Up |
Body Dia. | 4 in |
Motor Shaft Design | Spline |
Voltage Compatibility | 115/200-230V AC, 115/208-230V AC, 115/230V AC, 120/240V AC, 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/277V AC, 208-230/460V AC, 230V AC, 240V AC, 277/230V AC |
Usable @ 200V | No |
Length Less Shaft | 12 1/8 in |
Overall Length | 13 5/8 in |
Usable @ 208V | No |
No. of Speeds | 1 |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Deep Well Submersible Pump Motor, 1 HP, FLINT & WALLING, Mfr# 137418
$642,60
Free shipping will be applied on orders over $50
Deep Well Submersible Pump Motor, Body Dia. 4 in, Diaphragm Type Pressure Equalizing, Hz 60 Hz, Full Load Amps 8.2, Height 12 1/8 in, HP 1, Lead Length 48 in, Length Less Shaft 12 1/8 in, Max. Ambient Temp. 86 Degrees F, Max. SF Amps 10.4, Motor Application Pump, Motor Bearings Sleeve, Motor Design Split-Phase, Motor Enclosure Design Totally Enclosed Nonventilated
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.