| Item | Deep Well Submersible Pump Motor |
| Phase | Single |
| Dia. | 3 3/4 in |
| HP | 1/2 |
| Voltage | 115V AC |
| Number of Wires | 3 |
| RPM Range | 3,001-3,600 |
| Motor Service Factor | 1.6 |
| Motor Bearings | Sleeve |
| Nameplate RPM | 3,450 |
| Motor Application | Pump |
| Hz | 60 Hz |
| Standards | CSA (C22.2 No. 100-14), NSF/ANSI 61 |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Overload Relay Required | No |
| Shell Material | Stainless Steel |
| Thrust Rating | 700 lb |
| Motor Sub Application | Deep Well Submersible Pump |
| Lead Length | 48 in |
| Stator Type | Hermetically Sealed |
| Starter Required | No |
| Shaft Material | Stainless Steel |
| Full Load Amps | 10.0 |
| Height | 10 1/8 in |
| Motor Thermal Protection | Auto |
| Motor Design | Split-Phase |
| Max. Ambient Temp. | 86 Degrees F |
| Motor Shaft Rotation | CWSE |
| Max. SF Amps | 12.0 |
| Diaphragm Type | Pressure Equalizing |
| Overload Relay Max. Amp Setting | Not Applicable |
| Voltage Compatibility | 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC |
| Usable @ 200V | No |
| Motor Shaft Design | Spline |
| Motor Mounting Position | Vertical Shaft Up |
| No. of Speeds | 1 |
| Length Less Shaft | 10 1/8 in |
| Overall Length | 11 5/8 in |
| Body Dia. | 4 in |
| Usable @ 208V | No |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Deep Well Submersible Pump Motor, 1/2 HP, FLINT & WALLING, Mfr# 137426
$478,99
Free shipping will be applied on orders over $50
Deep Well Submersible Pump Motor, Body Dia. 4 in, Diaphragm Type Pressure Equalizing, Hz 60 Hz, Full Load Amps 10.0, Height 10 1/8 in, HP 1/2, Lead Length 48 in, Length Less Shaft 10 1/8 in, Max. Ambient Temp. 86 Degrees F, Max. SF Amps 12.0, Motor Application Pump, Motor Bearings Sleeve, Motor Design Split-Phase, Motor Enclosure Design Totally Enclosed Nonventilated
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.