| Voltage | 230V AC |
| Nameplate RPM | 2,500 |
| Motor Enclosure Design | Open Air-Over |
| Number of Speeds | 1 |
| HP | 1/50 |
| RPM Range | 1,801-3,000 |
| Mounting Stud Location | 4/Both Ends |
| Body Dia. | 3 5/16 in |
| Motor Bearings | Sleeve |
| Motor Shaft Design | Flat |
| Motor Service Factor | 1 |
| Application | HVAC/R |
| Hz | 60 Hz |
| Length Less Shaft | 4 1/4 in |
| No. of Speeds | 1 |
| Motor Sub Application | Direct Drive Fan/Blower |
| Full Load Amps | 0.64/0.53 A |
| Motor Application | HVAC/R |
| Standards | CSA Certified, UL Recognized |
| Motor Mounting Type | Stud |
| Motor Shaft Rotation | CWSE |
| Voltage Compatibility | 115/200-230V AC, 115/208-230V AC, 115/230V AC, 120/240V AC, 200-230/440V AC, 200-230/460V AC, 208-220/440V AC, 208-230/277V AC, 208-230/460V AC, 230V AC, 240V AC, 277/230V AC |
| Phase | Single |
| Motor Design | Shaded Pole |
| Stud/Base Mtg. Pattern | 2-7/8 in x 2-7/8 in |
| Mounting Pattern | 2-7/8 x 2-7/8 |
| Shaft Length | 1 1/4 in |
| Shaft Dia. | 1/4 in |
| Item | Direct Drive Blower Motor |
| Frame | 3.3 |
| Motor Thermal Protection | Auto |
| Number of Shafts | 1 |
| Ins. Class | B |
| Max. Ambient Temp. | 40 Degrees C |
| Duty | Continuous |
| Capacitor Required | No |
| Usable @ 208V | No |
| Lead Length | 12 in |
| Motor Frame Material | Steel |
| Overall Length | 5 1/8 in |
| Mounting Stud Pattern | 2 7/8 in x 2 7/8 in |
| Usable @ 200V | No |
| Motor Mounting Position | All Angle |
| Mounting Holes | (8) #8-32 |
| Stud Size | #8-32 |
| Weight | 3 lb |
| Bolt Circle Dia. | 2 7/8 in |
| RPM @ 50Hz | 3,000 RPM |
| Mounting | Stud |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
HVAC 3.3 In Motor, 1/50 HP, 230V, CW, FASCO, Mfr# D608
$93,19
Free shipping will be applied on orders over $50
Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/50 HP, Nameplate RPM 2,500, No. of Speeds 1, Voltage 230V AC, Full Load Amps 0.64/0.53 A, 3.3 Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 12 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Number of Shafts 1
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.