| Item | Motorized Progressive Cavity Pump |
| Min. RPM | 150 |
| Max. RPM | 1,750 RPM |
| Required HP @ Lower RPM | 1/32 hp |
| Max. Viscosity | 20,000 cPs |
| Series | 300 |
| Height (In.) | 7 7/8 |
| Flow Rate @ Max. RPM and 0 PSI | 4.7 gpm |
| Width (In.) | 6 1/2 |
| Flow Rate @ Min. RPM and 90 PSI | 0.21 gpm |
| Max. Fluid Temp. | 180 Degrees F |
| Application | Abrasive Slurries, Bridge Deck Flooding, Coatings, Dirty Oil, Drum Transfer, Feed Additives, Industrial Waste, Irrigation, Lubricants, Sewage Sampling, Swimming Pool Water |
| Housing Material | Cast Iron |
| Required HP @ Higher RPM | 1/2 hp |
| Min. Fluid Temp. | 10 Degrees F |
| Flow Rate @ Min. RPM and 0 PSI | 0.471 gpm |
| Flow Rate @ Max. RPM and 90 PSI | 2.45 gpm |
| Hz | 60 |
| Inlet/Outlet (In.) | 3/4 NPT |
| Seal Material | Carbon, Ceramic |
| Length (In.) | 19 23/32 |
| Voltage | 115/230V AC |
| Min. Pressure (PSI) | 0 psi |
| Particle Size | 4.0 mm |
| Max. Pressure (PSI) | 100 psi |
| Seal Type | Mechanical |
| Overall Height | 7.9 in |
| Overall Length | 19.7 in |
| Overall Width | 6.5 in |
| Media Temperature (Maximum) | 160 Degrees F |
| Discharge Connection Type | NPT |
| Intake Connection Size | 3/4 in |
| Motor Mounting Type | Close Coupled |
| Frequency | 60 Hz |
| Stator Material | Buna-N |
| Pump Operation Type | Motorized |
| Phase | Single |
| Horsepower (Maximum) | 1/2 hp |
| Suction Port | 3/4 in NPT |
| Intake Connection Type | NPT |
| Media Temperature (Minimum) | 10 Degrees F |
| Discharge Port | 3/4 in NPT |
| Nameplate Voltage | 115/230V AC |
| Motor Speed (Maximum) | 1,750 RPM |
| Viscosity (Maximum) | 20,000 cps |
| Solid Diameter (Maximum) | 4 mm |
| Operating Pressure (Maximum) | 100 psi |
| Rotor Material | Stainless Steel |
| Discharge Connection Size | 3/4 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Motorized Progressive Cavity Pump, 100psi, MOYNO, Mfr# 33259
$1695,99
-$1695.99 / ea
with subscription
Free shipping will be applied on orders over $50
Motorized Progressive Cavity Pump, Discharge Connection Size 3/4 in, Discharge Connection Type NPT, Horsepower (Maximum) 1/2 hp, Housing Material Cast Iron, Intake Connection Size 3/4 in, Intake Connection Type NPT, Media Temperature (Maximum) 160 Degrees F, Media Temperature (Minimum) 10 Degrees F, Nameplate Voltage 115/230V AC, Operating Pressure (Maximum) 100 psi, Pump Operation Type Motorized, Rotor Material Stainless Steel, Seal Material Carbon, Ceramic, Solid Diameter (Maximum) 4 mm
0 in stock
Must order in multiples of 1
Subtotal:
$1695.99
You must be logged in to post a review.
Reviews
There are no reviews yet.