Input Voltage
100 to 240V AC
Case Material
Plastic Case
Standards
IEC 62368-1, EN/IEC 61010-1, EN 61010-2-201, EN/IEC 61204-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3, IEC 61000-6-4, IEC 61000-3-2, EN 61000-3-3, UL 62368-1, UL 61010-1, UL 61010-2-201, CSA C22.2 No 62368-1, CSA C22.2 No 61010-1, CSA C22.2 No 61010-2-201, EN/IEC 62368-1
Network Frequency Limits
50-60 Hz
Power Factor
0.48 at 115 V AC, 0.38 at 230 V AC
Output Voltage Limits
12...15 V
Efficiency At Full Load
90...264 V AC
Line And Load Regulation
u003c 0.5 % network in line, u003c 1 % network 0 to 100 % load
Range of Product
Modicon Power Supply
Vibration Resistance
3 mm 2-9 Hz)IEC 60721-3-3, 10 m/s² 9-200 Hz)IEC 60721-3-3
Power Dissipation In W
4.6 W
Operating Altitude
u003c 6561.68 ft (2000 m) overvoltage category III, 2000 m...5000 m overvoltage category II
Power Supply Type
regulated switch mode
Electromagnetic Emission
conducted emissions IEC 61000-6-3, radiated emissions IEC 61000-6-4
Maximum Leakage Current
0.25 mA 240 V AC
Meantime Between Failure [Mtbf]
2500000 h at 25°C, full load, 1000000 h at 55°C, 80 % load
Electromagnetic Compatibility
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2, immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2, electromagnetic field immunity test - test level: 15 V/m (80 MHz...2 GHz) conforming to IEC 61000-4-3, electromagnetic field immunity test - test level: 5 V/m (2...2.7 GHz) conforming to IEC 61000-4-3, electromagnetic field immunity test - test level: 5 V/m (2.7...6 GHz) conforming to IEC 61000-4-3, immunity to fast transients - test level: 4 kV (on input-output) conforming to IEC 61000-4-4, surge immunity test - test level: 4 kV (between power supply and earth) conforming to IEC 61000-4-5, surge immunity test - test level: 3 kV (between phases) conforming to IEC 61000-4-5, immunity to conducted disturbances - test level: 15 V (0.15...80 MHz) conforming to IEC 61000-4-6, immunity to magnetic fields - test level: 30 A/m (50...60 Hz) conforming to IEC 61000-4-8, immunity to voltage dips - test level: 100 % (1 cycle) conforming to IEC 61000-4-11, immunity to voltage dips - test level: 60 % (10 cycles) conforming to IEC 61000-4-11, immunity to voltage dips - test level: 30 % (25 cycles) conforming to IEC 61000-4-11, disturbing field emission conforming to EN 55016-2-3, limits for harmonic current emissions conforming to IEC 61000-3-2, conforming to EN 55016-1-2, conforming to EN 55016-2-1
Input Protection Type
integrated fuse (not interchangeable) 3.15 A, external protection (recommended) 20 A Curve B, external protection (recommended) 20 A Curve C, external protection (recommended) 4 A Curve B, external protection (recommended) 4 A Curve C
Status Led
1 LED (Green) output voltage
Efficiency
85 % 115 V AC, 85 % 230 V AC
Shock Resistance
150 m/s² 11 ms
Mounting Support
top hat type TH35-15 rail IEC 60715, top hat type TH35-7.5 rail IEC 60715, double-profile DIN rail, panel mounting
Current Consumption
u003c 0.8 A 115 V AC, u003c 0.6 A 230 V AC
Electrical Shock Protection Class
class II without PE connection
Holding Time
u003e 20 ms 115 V AC, u003e 60 ms 230 V AC
Dielectric Strength
3000 V AC input/output
Power Supply Output Current
2.1 A
Ambient Air Temperature For Operation
-25-55°C without current derating mounting position A u003c 6561.68 ft (2000 m), 55-70°C with current derating of 2.67 % per°C mounting position A u003c 6561.68 ft (2000 m)
Inrush Current
25 A 115 V, 50 A 230 V
Residual Ripple
u003c 100 mV
Earthing System
TN, TT, IT
Supply
SELV IEC 60950-1, SELV IEC 60204-1, SELV IEC 60364-4-41
Output Protection Type
against overload and short-circuits automatic reset, against over temperature manual reset, against overvoltage manual reset
Country of Origin (subject to change)
Thailand
