| Property | Value |
|---|---|
| Hose Inside Dia. (In.) | 1/2 |
| Item | PTFE Hose Assembly |
| Hose Length (In.) | 60 |
| Dash Size | 10 |
| Fitting Type | FJIC x FJIC |
| Female JIC Size (In.) | 7/8-14 |
| Max. Operating PSI | 1500 |
| Tube Material | Polytetrafluoroethylene |
| Hose Outside Dia. (In.) | 0.648 |
| Temp. Range (F) | -65 To 450 |
| Fitting Size | 7/8 in x 7/8 in |
| Grade | Pharmaceutical |
| Fitting Material | 301 Stainless Steel x 301 Stainless Steel |
| Temp. Range | -65 Degrees to 450 Degrees F |
| Meets | FDA 41, SAE100R14 |
| Bend Radius | 6 1/2 in |
| Max. Pressure | 1500 psi |
| Outside Dia. | 41/64 |
| Length | 60 |
| Min. Bend Radius (In.) | 6.5 |
| Cover Material | Stainless Steel |
| Inside Dia. | 1/2 |
| Safety Factor | 4:1 |
| Standards | FDA 41, SAE100R14 |
| Hose Fitting A Type | FJIC |
| Hose Fitting B Type | FJIC |
| Hose Fitting A Material | 301 Stainless Steel |
| Hose Tube Material | PTFE |
| Hose Length | 5 ft |
| Hose Fitting B Size | 7/8 in |
| Hose Fitting A Size | 7/8 in |
| Max. Working Pressure @ 70 F | 1,500 psi |
| Hose Inside Dia. | 1/2 in |
| Hose Cover Material | 301 Stainless Steel |
| Hose Fitting B Material | 301 Stainless Steel |
| Hose Fittings | 301 Stainless Steel 7/8 in FJIC x 301 Stainless Steel 7/8 in FJIC |
| Hose Outside Dia. | 41/64 in |
| Compatible Chemicals | Acetic Acid 20%, Acetone, Adhesives, Air, Antifreeze (Coolant), Automatic Transmission Fluid, Brake Fluid, Carbon Dioxide, Chromic Acid 10%, Chromic Acid 5%, Citric Acid 50%, Diesel Fuel, Ethyl (Ethanol), Ethylene Glycol, Fertilizers, Formic Acid, Fresh Water, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Hydrogen Peroxide, Isopropyl (Isopropanol), Lithium Grease, Lubricated Air, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Mineral Oil , Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Salt Water, Sodium Bisulfate, Sodium Bisulfite, Solvents, Steam, Toluene, Turpentine, Vegetable Oil, Windshield Washer Fluid, Xylene |
| For Media Type | Acetic Acid, Chromic Acid, Citric Acid, Formic Acid, Hydrofluoric Acid, Nitric Acid, Ketones, Ethanol, Isopropanol, Methanol, Antifreeze, Ethylene Glycol, Gasoline, Diesel Fuel, Hydraulic Fluid, Toluene, Xylene, Water, Motor Oil, Methyl Chloride, Sodium Bisulfate, Sodium Bisulfite, Automatic Transmission Fluid, Brake Fluid, Fertilizers, Lithium Grease, Naphtha, Paint, Paint Thinner, Turpentine, Windshield Washer Fluid, Adhesives, Air, Carbon Dioxide, Fuel Oil, Hydrogen Peroxide, Lubricated Air, Mineral Oil |
| Not Recommended Chemicals | Automatic Transmission Fluid, Biodiesel, Brake Fluid, Diesel Fuel, E85, Fuel Oil, Gasoline, Heptane, Hexane, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Kerosene, Lacquer Thinners, Lubricated Air, Methyl Chloride, Mineral Oil , Motor Oil, Naphtha, Paint, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Solvents, Steam, Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Toluene, Trichlorethylene (50%), Turpentine, Vegetable Oil, Xylene |
| Maximum Working Pressure @ 70F | 1,500 psi |
| Hose Fitting Type B | FJIC |
| Hose Fitting Material B | 301 Stainless Steel |
| Hose ID | 1/2 in |
| Interior Texture | Smooth |
| Hose Fitting Type A | FJIC |
| Hose Conductivity | Non-Conductive |
| Hose Fitting Material A | 301 Stainless Steel |
| Hose Fitting Size A | 7/8 in |
| Hose Fitting Size B | 7/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
PTFE Hose, 1/2 IDx60 In L, SS, 1500 PSI, Aeroquip, Mfr#: 1PCL5
$169.99
Free shipping will be applied on orders over $50
Polytetrafluoroethylene Hose Assembly, Hose Inside Dia 1/2 In, Hose Length 60 In, Dash Size 10, Female JIC Size 7/8-14 In, Hose Outside Dia 0.648 In, Max Operating PSI 1500, 4:1 Safety Factor, Temp Range -65 to 450 F, Min Bend Radius 6.5 In, Tube Material Polytetrafluoroethylene, Cover Material Stainless Steel, Fitting Material Stainless Steel, Pharmaceutical Grade, Meets FDA 41, SAE100R14
9999 in stock
Subtotal:
$169.99
You must be logged in to post a review.
Reviews
There are no reviews yet.